LM2901VDTBR2G
| Parameters | |
|---|---|
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 22 hours ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Max Power Dissipation | 1W |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LM2901 |
| Pin Count | 14 |
| Output Type | CMOS, Open-Collector, TTL |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 2mA |
| Power Dissipation | 1W |
| Output Current | 16mA |
| Max Supply Current | 2mA |
| Quiescent Current | 2.5mA |
| Response Time | 1.3 μs |
| Voltage - Supply, Single/Dual (±) | 3V~36V ±1.5V~18V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 16mA |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.5μA |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 250nA |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 7mV @ 5V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Current - Output (Typ) | 16mA @ 5V |
| Height | 1.05mm |
| Length | 5.1mm |
| Width | 4.5mm |
| Radiation Hardening | No |
LM2901VDTBR2G Overview
For convenience, it is packaged in 14-TSSOP (0.173, 4.40mm Width) .A comparator with a CMOS, Open-Collector, TTL output is used here.The chip is packaged with Tape & Reel (TR) .Electronic comparator is possible to find the 14 terminals of the comparator.Other Comparator like the device play a important role in the industry.A comparator supplied with 5V voltage can complete many demanding tasks.When it comes to types, this comparator is a typical General Purpose .This element consists of 4 elements in total.Electronic comparator has 14 pins.Surface Mount universial mout for easy adapting.Electronic comparator is recommended that the operating temperature be set to -40°C~125°C in order to prevent malfunctions.The comparator has a pin count of 14 .In order to find a solution that meets your specific needs, search LM2901 for more pin-to-pin solutions.In this comparator, the quiescent current is 2.5mA .Normally, the nominal supply current should be 2mA .The compartator could be damaged if the current supply exceeds 2mA .In order to run the device, there are only 5V power supplies required.Input current to the device cannot exceed 250nA .Comparator electronics is clear from the voltage formula that the voltage gain of the part is 100dB .
LM2901VDTBR2G Features
CMOS, Open-Collector, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 2.5mA
Voltage Gain: 100dB
LM2901VDTBR2G Applications
There are a lot of ON Semiconductor LM2901VDTBR2G linear comparators applications.
- Lithium ion battery monitoring
- Current and voltage sensing
- Battery-Powered Electronics
- Power management
- Portable Battery Monitoring
- Ultra-Low Power Systems
- Self-diagnostics
- Mobile Phones
- General-Purpose, Low-Voltage Applications
- Automatic Test Equipment
