LM2901VQDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 122.413241mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Differential |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | LM2901 |
| Pin Count | 14 |
| Output Type | CMOS, MOS, Open-Collector, TTL |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 625μA |
| Output Current | 20mA |
| Max Supply Current | 625μA |
| Quiescent Current | 2.5mA |
| Response Time | 300 ns |
| Voltage - Supply, Single/Dual (±) | 2V~32V ±1V~16V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.25μA |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 250nA |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 7mV @ 32V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM2901VQDR Overview
The product is packaged in 14-SOIC (0.154, 3.90mm Width) to facilitate transportation.A comparator with an output type of CMOS, MOS, Open-Collector, TTL is being used.The part is shipped by Tape & Reel (TR) .Electronic comparator is possible to find the 14 terminals of the comparator.The chip belongs to Comparator .This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 5V .The type of the chip can be classified as Differential .This is a 4 element comparator.The board includes 14 pins.Electronic comparator is recommended that the mounting type be Surface Mount .A temperature setting of -40°C~125°C should be used for the operating temperature in order to prevent malfunctions.The comparator has a pin count of 14 .Search LM2901 to find more pin-to-pin solutions.There is 2.5mA current flowing in this comparator.The board has a Surface Mount for mounting on a PCB or any other board.For normal use of the device, the nominal supply current should be 625μA .An excess of current supply over 625μA could result in malfunction of the comparator.The device can be powered by 5V power supplies.The maximal current your can input into the device is 250nA .Based on the voltage formula, the voltage gain of the part is 100dB .This device can be used in general (for example, in ADC circuits). It is packaged in TR .
LM2901VQDR Features
CMOS, MOS, Open-Collector, TTL output capability
Differential IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 2.5mA
Voltage Gain: 100dB
LM2901VQDR Applications
There are a lot of Texas Instruments LM2901VQDR linear comparators applications.
- Security Detection Systems
- Window Comparators
- Mobile Phones
- Wide Range VCO; MOS Clock Timers
- Portable and Battery-Powered Systems
- Zero-Crossing Detectors
- Set Top Boxes
- General-Purpose Portable Devices
- General Purpose Low Voltage Applications
- Consumer Medical Electronics
