LM2901VQDRG4
| Parameters | |
|---|---|
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Differential |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | LM2901 |
| Pin Count | 14 |
| Output Type | CMOS, MOS, Open-Collector, TTL |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 625μA |
| Output Current | 20mA |
| Max Supply Current | 625μA |
| Quiescent Current | 2.5mA |
| Response Time | 300 ns |
| Voltage - Supply, Single/Dual (±) | 2V~32V ±1V~16V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.25μA |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 250nA |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 7mV @ 32V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 122.413241mg |
LM2901VQDRG4 Overview
The product is packaged in 14-SOIC (0.154, 3.90mm Width) to facilitate transportation.The comparator has a type CMOS, MOS, Open-Collector, TTL output.The part will be shipped by Tape & Reel (TR) .The comparator has 14 terminals.Electronic comparator is a component of the Comparator family.In the presence of a 5V voltage, the comparator is capable of accomplishing a variety of demanding tasks.In terms of type, this is a typical Differential comparator.Electronic comparator has a total of 4 elements.Electronic comparator has 14 pins.Electronic comparator is recommended to mount using type Surface Mount .In order to avoid malfunctions, the operating temperature should be set to -40°C~125°C .14 pins are available on the comparator.If you require more pin-to-pin solutions, search LM2901 for more options.As a result, this comparator displays a quiescent current of 2.5mA .The board has a Surface Mount for mounting on a PCB or any other board.Normal use of the device should require a nominal supply current of 625μA .A supply current exceeding 625μA may result in the comparator malfunctioning.The device can be run with 5V power supplies.Input current to the device is limited to 250nA .Comparator electronics follows that the voltage gain of the part is 100dB .Comparator electronics is acceptable to pack the device by TR .
LM2901VQDRG4 Features
CMOS, MOS, Open-Collector, TTL output capability
Differential IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 2.5mA
Voltage Gain: 100dB
LM2901VQDRG4 Applications
There are a lot of Texas Instruments LM2901VQDRG4 linear comparators applications.
- Mobile Communications
- Limit Comparators
- Automatic Test Equipment
- System control and monitoring
- Mobile Phones
- Power management
- Consumer Medical Electronics
- Wireless Base Stations
- General Purpose Low Voltage Applications
- Metering Systems
