LM2901VQDRG4Q1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 122.413241mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Differential |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | LM2901 |
| Pin Count | 14 |
| Output Type | CMOS, MOS, Open-Collector, TTL |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 625μA |
| Output Current | 20mA |
| Max Supply Current | 625μA |
| Quiescent Current | 2.5mA |
| Response Time | 300 ns |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Output Current per Channel | 100pA |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.25μA |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 250nA |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 7mV @ 5V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM2901VQDRG4Q1 Overview
The product is packaged in 14-SOIC (0.154, 3.90mm Width) in order to facilitate transportation.A comparator with a CMOS, MOS, Open-Collector, TTL output is used here.The part will be shipped by Tape & Reel (TR) .As you can see, the comparator has14 terminals.Electronic comparator is a component of the Comparator family.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.Electronic comparator is possible to classify the chip as Differential .In total, it contains 4 elements.The device is equipped with 14 pins.The recommended mounting type is Surface Mount .In order to avoid malfunctions, the operating temperature should be set to -40°C~125°C .There are 14 pins on the comparator.You can find more pin-to-pin solutions for your special requirements by searching LM2901 .The comparator displays a quiescent current of 2.5mA .This component has a Surface Mount mount for mounting to PCBs or other boards.The nominal supply current of the device should be 625μA for normal use.The compartator could be damaged if the current supply exceeds 625μA .Electronic comparator is sufficient to run the device wElectronic comparatorh 5V power supplies.Electronic comparator is possible to input up to 250nA current into the device.The voltage gain of the part is indicated by 100dB in the voltage formula.The part is from Automotive, AEC-Q100 comparator series.The device is packed in TR and is intended for general use (as an element in the ADC circuit).
LM2901VQDRG4Q1 Features
CMOS, MOS, Open-Collector, TTL output capability
Differential IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 2.5mA
Voltage Gain: 100dB
LM2901VQDRG4Q1 Applications
There are a lot of Texas Instruments LM2901VQDRG4Q1 linear comparators applications.
- Wearable Devices
- Multivibrators and High-Voltage Digital Logic Gates
- Window Comparators
- High-Speed Sampling Circuits
- Power management
- Wireless Base Stations
- Lithium ion battery monitoring
- Point of load regulators
- Zero-Crossing Detectors
- Battery management and protection
