Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 4 days ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
14-SOIC (0.154, 3.90mm Width) |
Number of Pins |
14 |
Weight |
122.413241mg |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
Series |
Automotive, AEC-Q100 |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Type |
Differential |
Subcategory |
Comparator |
Packing Method |
TR |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
5V |
Terminal Pitch |
1.27mm |
Base Part Number |
LM2901 |
Pin Count |
14 |
Output Type |
CMOS, MOS, Open-Collector, TTL |
Number of Elements |
4 |
Power Supplies |
5V |
Nominal Supply Current |
625μA |
Output Current |
20mA |
Max Supply Current |
625μA |
Quiescent Current |
2.5mA |
Response Time |
300 ns |
Voltage - Supply, Single/Dual (±) |
2V~36V ±1V~18V |
Output Current per Channel |
100pA |
Input Offset Voltage (Vos) |
7mV |
Voltage Gain |
100dB |
Average Bias Current-Max (IIB) |
0.25μA |
Supply Voltage Limit-Max |
36V |
Max Input Current |
250nA |
Input Bias Current |
-250nA |
Voltage - Input Offset (Max) |
7mV @ 5V |
Current - Input Bias (Max) |
0.25μA @ 5V |
Height |
1.75mm |
Length |
8.65mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
LM2901VQDRQ1 Overview
To facilitate transportation, it comes packaged in 14-SOIC (0.154, 3.90mm Width) .This comparator is of the CMOS, MOS, Open-Collector, TTL output type.Electronic comparator is shipped by Tape & Reel (TR) .14 terminals are found on the comparator.Electronic comparator is a part of Comparator family.A comparator is capable of completing a variety of demanding tasks when supplied with 5V voltage.Electronic comparator can be classified as a Differential chip.A total of 4 elements can be found in it.Electronic comparator includes 14 pins.The recommended mounting type is Surface Mount .Electronic comparator is recommended that you set the operating temperature to -40°C~125°C in order to prevent malfunctions.There are 14 pins on the comparator.In case you are looking for more pin-to-pin solutions, you may want to search LM2901 .A quiescent current of 2.5mA is displayed by this comparator.A Surface Mount is provided for mounting on PCBs or other boards.Electronic comparator is recommended that the nominal supply current for the device be set to 625μA .A current supply greater than 625μA may cause the comparator to malfunction.In order to operate the device, 5V power supplies are sufficient.Input current to the device is limited to 250nA .The voltage formula shows that the part has a voltage gain of 100dB .A comparator part from the Automotive, AEC-Q100 series is used in this part.The device is packed in TR and is intended for general use (as an element in the ADC circuit).
LM2901VQDRQ1 Features
CMOS, MOS, Open-Collector, TTL output capability
Differential IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 2.5mA
Voltage Gain: 100dB
LM2901VQDRQ1 Applications
There are a lot of Texas Instruments LM2901VQDRQ1 linear comparators applications.
- Pulse, Squarewave, and Time Delay Generators
- General-Purpose Portable Devices
- RC Timers
- Building automation
- Analog front end
- Automatic Test Equipment
- High-Speed Differential Line Receiver
- Multivibrators and High-Voltage Digital Logic Gates
- Power management
- Simple Analog-to-Digital Converters (ADCs)