LM2901VQPWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM2901 |
| Pin Count | 14 |
| Output Type | CMOS, MOS, Open-Collector, TTL |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Output Current | 16nA |
| Quiescent Current | 2mA |
| Supply Current-Max | 2.5mA |
| Response Time | 1300 ns |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.5μA |
| Supply Voltage Limit-Max | 36V |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 7mV @ 5V |
| Current - Input Bias (Max) | 250nA @ 5V |
| Current - Output (Typ) | 16nA @ 5V |
| Height Seated (Max) | 1.2mm |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
LM2901VQPWR Overview
A convenient packaging is provided in the form of 14-TSSOP (0.173, 4.40mm Width) .The comparator has an output type of CMOS, MOS, Open-Collector, TTL .This chip is designed with the Tape & Reel (TR) package.The device is designed with 14 terminations.Electronic comparator is a component of the Comparator family.The comparator is capable of achieving many demanding tasks when supplied with 5V voltage.Electronic comparator is possible to classify the chip as General Purpose .There are a total of 4 elements in it.The device contains 14 pins.The type of mounting recommended is Surface Mount .In order to avoid malfunctions, the operating temperature should be set to -40°C~125°C .This comparator has 14 pins.You may wish to search LM2901 for more solutions that address your specific needs.There is 2mA current flowing in this comparator.This component has a Surface Mount mount for mounting to PCBs or other boards.A power supply of 5V is sufficient for the operation of the device.Comparator electronics follows that the voltage gain of the part is 100dB .This part can be supplied with a maimum current of 2.5mA .
LM2901VQPWR Features
CMOS, MOS, Open-Collector, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 2mA
Voltage Gain: 100dB
LM2901VQPWR Applications
There are a lot of ROHM Semiconductor LM2901VQPWR linear comparators applications.
- Battery-Powered Electronics
- Factory automation & control
- RC Timers
- Notebooks and PDAs
- Ultra-Low Power Systems
- General-Purpose, Low-Voltage Applications
- Battery management and protection
- Automatic Test Equipment
- System control and monitoring
- Point of load regulators
