LM2901VQPWRG4Q1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Differential |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | LM2901 |
| Pin Count | 14 |
| Output Type | CMOS, MOS, Open-Collector, TTL |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 2mA |
| Output Current | 20mA |
| Max Supply Current | 2mA |
| Quiescent Current | 2.5mA |
| Response Time | 300 ns |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.25μA |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 250nA |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 7mV @ 5V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM2901VQPWRG4Q1 Overview
In order to facilitate transportation, it is packaged in 14-TSSOP (0.173, 4.40mm Width) .The comparator has a type CMOS, MOS, Open-Collector, TTL output.The part is shipped by Tape & Reel (TR) .The device is designed with 14 terminations.Electronic comparator is a component of the Comparator family.In the presence of a 5V voltage, the comparator is capable of accomplishing a variety of demanding tasks.In general, the chip type can be classified as Differential .There are a total of 4 elements in it.The board includes 14 pins.The type of mounting recommended is Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -40°C~125°C .Electronic comparator has 14 pins.Try search LM2901 to get more pin-to-pin solutions for your special needs.There is a quiescent current of 2.5mA in this comparator.The PCB or other board can be mounted using the Surface Mount on it.Normal operation of the device requires a nominal supply current of 2mA .If the current supply exceeds 2mA , the comparator could malfunction.In order to operate the device, 5V power supplies are sufficient.There is a maximum current that can be input into the device of 250nA .Comparator electronics is clear from the voltage formula that the voltage gain of the part is 100dB .Comparator electronics comes from the series of Automotive, AEC-Q100 comparator parts.Often found in ADC circuits, this device is packed in TR .
LM2901VQPWRG4Q1 Features
CMOS, MOS, Open-Collector, TTL output capability
Differential IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 2.5mA
Voltage Gain: 100dB
LM2901VQPWRG4Q1 Applications
There are a lot of Texas Instruments LM2901VQPWRG4Q1 linear comparators applications.
- Security Detection Systems
- Industrial
- Metering Systems
- Laptop Computers
- Automotive
- Battery management and protection
- Window Comparators
- Factory automation & control
- Limit Comparators
- Threshold Detectors
