LM2901YDT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LM2901 |
| Pin Count | 14 |
| Output Type | CMOS, DTL, ECL, MOS, Open-Collector, TTL |
| Operating Supply Voltage | 28V |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 2mA |
| Output Current | 16mA |
| Propagation Delay | 1.3 μs |
| Quiescent Current | 2.5mA |
| Turn On Delay Time | 1.3 μs |
| Response Time | 1.3 μs |
| Voltage - Supply, Single/Dual (±) | 2V~32V ±1V~16V |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 106.02dB |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 250nA |
| Dual Supply Voltage | 9V |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 7mV @ 5V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Natural Thermal Resistance | 105 °C/W |
| Current - Output (Typ) | 16mA @ 5V |
| Height | 1.65mm |
| Length | 8.75mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM2901YDT Overview
A convenient transport package is provided in 14-SOIC (0.154, 3.90mm Width) .The comparator has an output type of CMOS, DTL, ECL, MOS, Open-Collector, TTL .Electronic comparator is shipped by Tape & Reel (TR) .14 terminals are found on the comparator.The component belongs to the Comparator family of electrical components.Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.Electronic comparator can be classified as a General Purpose chip.Electronic comparator consists of 4 elements in total.As a result, it contains 14 pins.The recommended mounting method is Surface Mount .As a precaution, it is recommended to set the operating temperature to -40°C~125°C to prevent malfunctions.14 pins are available on the comparator.You may wish to search LM2901 for more solutions that address your specific needs.There is a quiescent current of 2.5mA in this comparator.The PCB or other board has a Surface Mount for mounting.Electronic comparator is recommended that the nominal supply current of the device be 2mA .In order to run the device, there are only 5V power supplies required.Electronic comparator is possible to input a maximum of 250nA current into the device.Comparator electronics is apparent from the voltage formula that the voltage gain for the part is 106.02dB .The part belongs to the series of comparator Automotive, AEC-Q100 .The operating supply voltage for normal operation should be 28V .Comparator electronics is acceptable to pack the device by TAPE AND REEL .
LM2901YDT Features
CMOS, DTL, ECL, MOS, Open-Collector, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
LM2901YDT Applications
There are a lot of STMicroelectronics LM2901YDT linear comparators applications.
- Alarm and Monitoring Circuits
- Automotive
- Current and voltage sensing
- Lithium ion battery monitoring
- Simple Analog-to-Digital Converters (ADCs)
- Factory automation & control
- Self-diagnostics
- Laptop Computers
- Portable and Battery-Powered Systems
- Automatic Test Equipment
