LM2901YPT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM2901 |
| Pin Count | 14 |
| Output Type | CMOS, DTL, ECL, MOS, Open-Collector, TTL |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 2.5mA |
| Output Current | 16mA |
| Max Supply Current | 2.5mA |
| Propagation Delay | 1.3 μs |
| Quiescent Current | 2.5mA |
| Turn On Delay Time | 1.3 μs |
| Response Time | 500 ns |
| Voltage - Supply, Single/Dual (±) | 2V~32V ±1V~16V |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 106.02dB |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 250nA |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 7mV @ 5V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Current - Output (Typ) | 16mA @ 5V |
| Height | 1.05mm |
| Length | 5.1mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
LM2901YPT Overview
In order to make transportation easier, it is packaged in 14-TSSOP (0.173, 4.40mm Width) .The comparator has a CMOS, DTL, ECL, MOS, Open-Collector, TTL output.We ship the part through Tape & Reel (TR) .The comparator has a total of 14 terminals.Other Comparator like the device play a important role in the industry.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.In terms of type, this is a typical General Purpose comparator.Electronic comparator has a total of 4 elements.As a result, it contains 14 pins.Electronic comparator is recommended to mount using type Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~125°C in order to prevent malfunctions.14 pins are available on the comparator.You can find more pin-to-pin solutions for your special requirements by searching LM2901 .There is a quiescent current of 2.5mA in this comparator.This component has a Surface Mount mount for mounting to PCBs or other boards.The nominal supply current of the device should be 2.5mA for normal use.An excess of current supply over 2.5mA could result in malfunction of the comparator.In order to run the device, there are only 5V power supplies required.Electronic comparator is possible to input a maximum current of 250nA into the device.The voltage gain of the part is indicated by 106.02dB in the voltage formula.The part belongs to the series of comparator Automotive, AEC-Q100 .Comparator electronics is packed in TAPE AND REEL , and is commonly used in ADC circuComparator electronicss.
LM2901YPT Features
CMOS, DTL, ECL, MOS, Open-Collector, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
LM2901YPT Applications
There are a lot of STMicroelectronics LM2901YPT linear comparators applications.
- General Purpose Low Voltage Applications
- DC/DC and AC/DC power supplies
- Factory automation & control
- Wearable Devices
- Analog front end
- Notebooks and PDAs
- Hand-Held Electronics
- Lithium ion battery monitoring
- Window Comparators, Multivibrators
- Infotainment & cluster
