LM2902KAVQDR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | LM2902 |
| Pin Count | 14 |
| Operating Supply Voltage | 13V |
| Number of Channels | 2 |
| Number of Circuits | 4 |
| Operating Supply Current | 1.4mA |
| Nominal Supply Current | 3mA |
| Output Current | 30mA |
| Slew Rate | 0.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 20nA |
| Voltage - Supply, Single/Dual (±) | 3V~32V ±1.5V~16V |
| Output Current per Channel | 60mA |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 1.2MHz |
| Unity Gain BW-Nom | 1200 kHz |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.5μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 3mV |
| Low-Bias | NO |
| Micropower | YES |
| Programmable Power | NO |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.15μA |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
LM2902KAVQDR Overview
There is a 14-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. Op amps are General Purpose types of amplifier on the chip. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. The number of terminations is approaching the 14 mark. A total of 14 pins are located on this board. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. 14 pins are available on the instrumentation amplifier. With regard to input offset voltage, instrumentation amplifier is rated at 2mV. For this electronic part, it is recommended that you mount it with type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . In order for this instrumentation amplifier to operate, the supply current needs to be between 1.4mA and 10 . Keeping the voltage gain at 100dB is the best course of action. There are 4 circuits on op amps. There are a total of 2 channels available on the op amps. The operating supply voltage of the buffer op amp is rated at 13V. The linear amplifier is packaged by using a TR axis.
LM2902KAVQDR Features
14 Pins
supply voltage of 5V
100dB voltage gain
LM2902KAVQDR Applications
There are a lot of Texas Instruments LM2902KAVQDR Instrumentational OP Amps applications.
- Commercial audio systems
- Strain gauges
- Hand-held batteries
- Weak signal detection
- Comparator
- Television broadcasting equipment
- Communication device
- Broadcasting
- Proportional operation circuits
- Non-polarized electrodes
