LM2902KVQDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 16 hours ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | LM2902 |
| Pin Count | 14 |
| Operating Supply Voltage | 13V |
| Number of Channels | 2 |
| Number of Circuits | 4 |
| Operating Supply Current | 1.4mA |
| Nominal Supply Current | 3mA |
| Output Current | 30mA |
| Slew Rate | 0.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 20nA |
| Voltage - Supply, Single/Dual (±) | 3V~32V ±1.5V~16V |
| Output Current per Channel | 60mA |
| Input Offset Voltage (Vos) | 7mV |
| Bandwidth | 1.2MHz |
| Unity Gain BW-Nom | 1200 kHz |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.5μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 3mV |
| Low-Bias | NO |
| Micropower | YES |
| Programmable Power | NO |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.15μA |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM2902KVQDR Overview
The linear amplifier is packaged in a 14-SOIC (0.154, 3.90mm Width) case. The instrumentation amplifier in this picture is of the General Purpose-type. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. The number of terminations approaches 14. The total number of pins on linear amplifier is 14. Please take in mind that this instrumentation amplifier should be run at 5V. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. The op amp ic has an array of 14 pins on it. In terms of input offset voltage, operational amplifier rates 7mV. For this electronic part, it is recommended that you mount it with type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . The buffer amplifier is capable of operating from a supply current of 1.4mA . Voltage gain should remain at 100dB. This op amp contains 4 circuits. Buffer op amp is equipped with 2 channels on the device. The operating supply voltage of the buffer op amp is rated at 13V. It is used TR to pack the op amps.
LM2902KVQDR Features
14 Pins
supply voltage of 5V
100dB voltage gain
LM2902KVQDR Applications
There are a lot of Texas Instruments LM2902KVQDR Instrumentational OP Amps applications.
- Semiconductor detectors
- Industrial applications including automation
- Exponential operation circuits
- Video conversion and routing
- Radar
- Switching amplifier
- Signal operation
- High-frequency data acquisition systems
- Communication device
- Precision measurement
