Parameters |
ECCN Code |
EAR99 |
Type |
Differential |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Comparator |
Packing Method |
TR |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Base Part Number |
LM2903 |
Pin Count |
8 |
Output Type |
CMOS, MOS, Open-Collector, TTL |
Number of Elements |
2 |
Nominal Supply Current |
1mA |
Output Current |
20mA |
Max Supply Current |
400μA |
Quiescent Current |
2.5mA |
Response Time |
1.3 μs |
Voltage - Supply, Single/Dual (±) |
2V~36V ±1V~18V |
Output Current per Channel |
6mA |
Input Offset Voltage (Vos) |
2mV |
Voltage Gain |
100dB |
Average Bias Current-Max (IIB) |
0.05μA |
Supply Voltage Limit-Max |
36V |
Max Input Current |
250nA |
Input Bias Current |
250nA |
Voltage - Input Offset (Max) |
2mV @ 5V |
Current - Input Bias (Max) |
0.25μA @ 5V |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 day ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
Series |
Automotive, AEC-Q100 |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
LM2903AVQDRQ1 Overview
To facilitate transportation, it comes packaged in 8-SOIC (0.154, 3.90mm Width) .Output type of this comparator is CMOS, MOS, Open-Collector, TTL .As a result, it is designed with Tape & Reel (TR) package.The comparator has 8 terminals.Electronic comparator is a part of Comparator family.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 5V .When it comes to types, this comparator is a typical Differential .There are a total of 2 elements in it.The device contains 8 pins.The type of mounting recommended is Surface Mount .Ideally, the operating temperature should be set at -40°C~125°C in order to prevent malfunction.There are 8 pins on the comparator.You may wish to search LM2903 for more solutions that address your specific needs.A quiescent current of 2.5mA is observed in this comparator.A Surface Mount is provided for mounting it onto a PCB or another board.Normal operation of the device requires 1mA supply current.Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 400μA .There is a maximum current that can be input into the device of 250nA .Comparator electronics follows that the voltage gain of the part is 100dB .Comparator electronics is part of the Automotive, AEC-Q100 comparator series.Packed in TR , this device is for general uses (often in ADC circuits).
LM2903AVQDRQ1 Features
CMOS, MOS, Open-Collector, TTL output capability
Differential IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 2.5mA
Voltage Gain: 100dB
LM2903AVQDRQ1 Applications
There are a lot of Texas Instruments LM2903AVQDRQ1 linear comparators applications.
- Pulse, Squarewave, and Time Delay Generators
- General Purpose Low Voltage Applications
- Battery-Powered Electronics
- Window Comparators
- Building automation
- Point of load regulators
- Power management
- Handheld Instruments
- General-Purpose Portable Devices
- Portable and Battery-Powered Systems