Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 4 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
8 |
Weight |
34.50137mg |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
Differential |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Comparator |
Packing Method |
TR |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Base Part Number |
LM2903 |
Pin Count |
8 |
Output Type |
CMOS, MOS, Open-Drain, TTL |
Operating Supply Voltage |
28V |
Number of Elements |
2 |
Power Supplies |
5V |
Nominal Supply Current |
1mA |
Output Current |
20mA |
Max Supply Current |
500μA |
Quiescent Current |
2.5mA |
Response Time |
300 ns |
Voltage - Supply, Single/Dual (±) |
2V~36V ±1V~18V |
Output Current per Channel |
6mA |
Input Offset Voltage (Vos) |
2mV |
Voltage Gain |
100dB |
Average Bias Current-Max (IIB) |
0.05μA |
Supply Voltage Limit-Max |
36V |
Max Input Current |
250nA |
Dual Supply Voltage |
9V |
Input Bias Current |
250nA |
Voltage - Input Offset (Max) |
2mV @ 5V |
Current - Input Bias (Max) |
0.25μA @ 5V |
Height |
1.2mm |
Length |
3mm |
Width |
4.4mm |
Thickness |
1mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
LM2903AVQPWR Overview
To facilitate transportation, it comes packaged in 8-TSSOP (0.173, 4.40mm Width) .Output type CMOS, MOS, Open-Drain, TTL is used for this comparator.The chip is packaged with Tape & Reel (TR) .There are8 terminals on the comparator.The electrical component in this case belongs to the Comparator family.The comparator is capable of achieving many demanding tasks when supplied with 5V voltage.When it comes to types, this comparator is a typical Differential .This is a 2 element comparator.As a result, it contains 8 pins.Electronic comparator is recommended to mount using type Surface Mount .A temperature setting of -40°C~125°C should be used for the operating temperature in order to prevent malfunctions.8 pins are present on the comparator.Try search LM2903 to get more pin-to-pin solutions for your special needs.There is a quiescent current of 2.5mA in this comparator.There is a Surface Mount for mounting it on a PCB or other board.Normal use of the device should require a nominal supply current of 1mA .A current supply greater than 500μA may cause the comparator to malfunction.In order to operate the device, 5V power supplies are sufficient.Electronic comparator is possible to input a maximum of 250nA current into the device.Comparator electronics is apparent from the voltage formula that the voltage gain for the part is 100dB .A normal operation requires a voltage of 28V .This device is usually used in ADC circuits (packaged in TR ).
LM2903AVQPWR Features
CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 2.5mA
Voltage Gain: 100dB
LM2903AVQPWR Applications
There are a lot of Texas Instruments LM2903AVQPWR linear comparators applications.
- Simple Analog-to-Digital Converters (ADCs)
- Window Comparators
- Multivibrators and High-Voltage Digital Logic Gates
- Zero-Crossing Detectors
- Window Comparators, Multivibrators
- Threshold Detectors
- Notebooks and PDAs
- Consumer Medical Electronics
- Wireless Base Stations
- Body Control Modules