LM2903AVQPWRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Weight | 34.50137mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Differential |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM2903 |
| Pin Count | 8 |
| Output Type | CMOS, MOS, Open-Collector, TTL |
| Number of Elements | 2 |
| Nominal Supply Current | 1mA |
| Output Current | 20mA |
| Max Supply Current | 400μA |
| Quiescent Current | 2.5mA |
| Response Time | 300 ns |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 2mV |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.05μA |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 250nA |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 2mV @ 5V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM2903AVQPWRQ1 Overview
A convenient packaging is provided in the form of 8-TSSOP (0.173, 4.40mm Width) .A comparator with an output type of CMOS, MOS, Open-Collector, TTL is being used.We ship the part through Tape & Reel (TR) .There are8 terminals on the comparator.The electrical component in this case belongs to the Comparator families.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.Electronic comparator can be classified as a Differential chip.Currently, it consists of only 2 elements.The device contains 8 pins.Electronic comparator is recommended that you mount the device using type Surface Mount .The operating temperature should be set to -40°C~125°C to avoid mal-function.8 pins are present on the comparator.In case you are looking for more pin-to-pin solutions, you may want to search LM2903 .There is a quiescent current of 2.5mA in this comparator.The board has a Surface Mount for mounting on a PCB or any other board.The nominal supply current of the device should be 1mA for normal use.An excess of current supply over 400μA could result in malfunction of the comparator.Electronic comparator is possible to input a maximum current of 250nA into the device.In accordance with the voltage formula, the part's voltage gain is 100dB .Comparator electronics comes from the series of Automotive, AEC-Q100 comparator parts.Often found in ADC circuits, this device is packed in TR .
LM2903AVQPWRQ1 Features
CMOS, MOS, Open-Collector, TTL output capability
Differential IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 2.5mA
Voltage Gain: 100dB
LM2903AVQPWRQ1 Applications
There are a lot of Texas Instruments LM2903AVQPWRQ1 linear comparators applications.
- Pulse, Squarewave, and Time Delay Generators
- Laptop Computers
- Ultra-Low Power Systems
- Analog front end
- Notebooks and PDAs
- Current and voltage sensing
- DC/DC and AC/DC power supplies
- General Purpose Low Voltage Applications
- Infotainment and Clusters
- General-Purpose Portable Devices
