Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Weight |
72.603129mg |
Operating Temperature |
-40°C~125°C |
Packaging |
Tube |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
Differential |
Subcategory |
Comparator |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Base Part Number |
LM2903 |
Pin Count |
8 |
Output Type |
CMOS, MOS, Open-Drain, TTL |
Operating Supply Voltage |
28V |
Number of Elements |
2 |
Power Supplies |
5/30V |
Nominal Supply Current |
1mA |
Output Current |
20mA |
Max Supply Current |
500μA |
Quiescent Current |
2.5mA |
Response Time |
300 ns |
Voltage - Supply, Single/Dual (±) |
2V~36V ±1V~18V |
Output Current per Channel |
6mA |
Input Offset Voltage (Vos) |
7mV |
Voltage Gain |
100dB |
Average Bias Current-Max (IIB) |
0.05μA |
Supply Voltage Limit-Max |
36V |
Max Input Current |
250nA |
Dual Supply Voltage |
9V |
Input Bias Current |
250nA |
Voltage - Input Offset (Max) |
7mV @ 30V |
Current - Input Bias (Max) |
0.25μA @ 5V |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
LM2903DG4 Overview
In order to facilitate transportation, it is packaged in 8-SOIC (0.154, 3.90mm Width) .The comparator has a CMOS, MOS, Open-Drain, TTL output.This package has been designed with Tube .Electronic comparator is possible to find the 8 terminals of the comparator.The component belongs to the Comparator family of electrical components.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.In terms of type, this is a typical Differential comparator.This is a 2 element comparator.Electronic comparator has 8 pins.In general, mounting type Surface Mount is recommended.A temperature setting of -40°C~125°C should be used for the operating temperature in order to prevent malfunctions.The comparator is equipped with 8 pins.You may wish to search LM2903 for more solutions that address your specific needs.A quiescent current of 2.5mA is displayed by this comparator.There is a Surface Mount on the board for mounting to a PCB or other board.Normal operation of the device requires 1mA supply current.If the current supply exceeds 500μA , the comparator might be damaged.The device can be operated with 5/30V power supplies.Electronic comparator is possible to input a maximum current of 250nA into the device.A voltage gain of 100dB can be determined from the voltage formula for the part.The operating supply voltage for normal operation should be 28V .
LM2903DG4 Features
CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 2.5mA
Voltage Gain: 100dB
LM2903DG4 Applications
There are a lot of Texas Instruments LM2903DG4 linear comparators applications.
- Self-diagnostics
- Infotainment and Clusters
- Mobile Phones
- Wide Range VCO; MOS Clock Timers
- Ultra-Low Power Systems
- Power management
- Battery-Powered Electronics
- Wearable Devices
- Zero-Crossing Detectors
- High-Speed Differential Line Receiver