LM2903DGKRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Weight | 18.99418mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Differential |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM2903 |
| Pin Count | 8 |
| Output Type | CMOS, MOS, Open-Drain, TTL |
| Operating Supply Voltage | 28V |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Nominal Supply Current | 1mA |
| Output Current | 20mA |
| Max Supply Current | 500μA |
| Quiescent Current | 2.5mA |
| Response Time | 300 ns |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.05μA |
| Supply Voltage Limit-Max | 36V |
| Dual Supply Voltage | 9V |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 7mV @ 30V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM2903DGKRG4 Overview
Electronic comparator is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) for convenient transportation.The comparator has a type CMOS, MOS, Open-Drain, TTL output.Ready for shipping in Tape & Reel (TR) package.The device is designed with 8 terminations.The electrical component in this case belongs to the Comparator family.A comparator supplied with 5V voltage can complete many demanding tasks.This is a typical comparator of type Differential .This is a 2 element comparator.Electronic comparator has 8 pins.The recommended mounting type is Surface Mount .Electronic comparator is recommended that you set the operating temperature to -40°C~125°C in order to prevent malfunctions.There are 8 pins on the comparator.You may wish to search LM2903 for more solutions that address your specific needs.This comparator presents a quiescent current of 2.5mA .There is a Surface Mount on the board for mounting to a PCB or other board.Normally, the nominal supply current should be 1mA .The compartator could be damaged if the current supply exceeds 500μA .There is sufficient power to run the device from 5V power supplies.In accordance with the voltage formula, the part's voltage gain is 100dB .Normal operation requires 28V operating supply voltage.With a TR package, this device is designed for general use (usually in ADC circuits).
LM2903DGKRG4 Features
CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 2.5mA
Voltage Gain: 100dB
LM2903DGKRG4 Applications
There are a lot of Texas Instruments LM2903DGKRG4 linear comparators applications.
- Body Control Modules
- Wide Range VCO; MOS Clock Timers
- General Purpose Low Voltage Applications
- Multivibrators and High-Voltage Digital Logic Gates
- Mobile Phones and Tablets
- Portable Battery Monitoring
- Notebooks and PDAs
- Zero-Crossing Detectors
- System control and monitoring
- Automotive
