LM2903HYDT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LM2903 |
| Pin Count | 8 |
| Output Type | CMOS, DTL, ECL, MOS, Open-Collector, TTL |
| Number of Elements | 2 |
| Nominal Supply Current | 1mA |
| Response Time | 1.3 μs |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.4μA |
| Supply Voltage Limit-Max | 36V |
| Current - Quiescent (Max) | 2.5mA |
| Voltage - Input Offset (Max) | 7mV @ 30V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Current - Output (Typ) | 16mA @ 5V |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
LM2903HYDT Overview
A convenient packaging is provided in the form of 8-SOIC (0.154, 3.90mm Width) .Output type CMOS, DTL, ECL, MOS, Open-Collector, TTL is used for this comparator.This chip is designed with the Tape & Reel (TR) package.There are 8 terminals on the comparator.Other Comparator like the device play a important role in the industry.With a 5V voltage supply, the comparator can perform multiple demanding tasks.When it comes to types, this comparator is a typical General Purpose .Electronic comparator consists of 2 elements in total.A total of 8 pins are included.Electronic comparator is recommended that the mounting type be Surface Mount .To ensure proper functioning, the operating temperature should be set to -40°C~150°C .The comparator has 8 pins.You can find more pin-to-pin solutions for your special requirements by searching LM2903 .The PCB or other board has a Surface Mount for mounting.Normally, the nominal supply current should be 1mA when using the device.Based on the voltage formula, the voltage gain of the part is 106.02dB .The part is based on Automotive, AEC-Q100 .The device is acceptable to pack by TAPE AND REEL .
LM2903HYDT Features
CMOS, DTL, ECL, MOS, Open-Collector, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~150°C
Voltage Gain: 106.02dB
LM2903HYDT Applications
There are a lot of STMicroelectronics LM2903HYDT linear comparators applications.
- RC Timers
- Threshold Detectors
- Metering Systems
- General-Purpose Portable Devices
- Security Detection Systems
- Zero-Crossing Detectors
- Body Control Modules
- Automotive
- System control and monitoring
- Power Supervision
