Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 day ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-WFBGA |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e1 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Terminal Finish |
Tin/Silver/Copper (Sn/Ag/Cu) |
Subcategory |
Comparator |
Packing Method |
TR |
Max Power Dissipation |
568mW |
Technology |
BIPOLAR |
Terminal Position |
BOTTOM |
Terminal Form |
BALL |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Terminal Pitch |
0.5mm |
Base Part Number |
LM2903 |
Pin Count |
8 |
Output Type |
CMOS, DTL, ECL, MOS, Open-Collector, TTL |
Number of Elements |
2 |
Power Supplies |
5V |
Nominal Supply Current |
500μA |
Power Dissipation |
568mW |
Output Current |
16mA |
Max Supply Current |
1mA |
Propagation Delay |
700 ns |
Quiescent Current |
2.5mA |
Response Time |
1500 ns |
Voltage - Supply, Single/Dual (±) |
2V~36V ±1V~18V |
Input Offset Voltage (Vos) |
7mV |
Voltage Gain |
100dB |
Supply Voltage Limit-Max |
36V |
Max Input Current |
250nA |
Input Bias Current |
250nA |
Current - Quiescent (Max) |
2.5mA |
Voltage - Input Offset (Max) |
7mV @ 30V |
Current - Input Bias (Max) |
0.25μA @ 5V |
Current - Output (Typ) |
16mA @ 5V |
Height |
675μm |
Length |
2mm |
Width |
1.3mm |
Thickness |
675μm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
LM2903ITL/NOPB Overview
The product is packaged in 8-WFBGA to facilitate transportation.There is a CMOS, DTL, ECL, MOS, Open-Collector, TTL output type for this comparator.This package has been designed with Tape & Reel (TR) .The device is designed with 8 terminations.The chip belongs to Comparator .With a 5V voltage supply, the comparator can perform multiple demanding tasks.It's a typical General Purpose comparator.There are a total of 2 elements in it.The device is equipped with 8 pins.Electronic comparator is recommended that you mount the device using type Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~85°C in order to prevent malfunctions.There are 8 pins on the comparator.If you require more pin-to-pin solutions, search LM2903 for more options.This comparator presents a quiescent current of 2.5mA .This component has a Surface Mount mount for mounting to PCBs or other boards.Electronic comparator is recommended that the nominal supply current for the device be set to 500μA .Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 1mA .5V power supplies are enough to run the device.A maximum current of 250nA can be supplied to the device.From the voltage formula, the voltage gain of the part is 100dB .With a TR package, this device is designed for general use (usually in ADC circuits).
LM2903ITL/NOPB Features
CMOS, DTL, ECL, MOS, Open-Collector, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 2.5mA
Voltage Gain: 100dB
LM2903ITL/NOPB Applications
There are a lot of Texas Instruments LM2903ITL/NOPB linear comparators applications.
- Handheld Instruments
- Automotive
- Current and voltage sensing
- Power Supervision
- Wide Range VCO; MOS Clock Timers
- DC/DC and AC/DC power supplies
- Factory automation & control
- Consumer Medical Electronics
- Multivibrators and High-Voltage Digital Logic Gates
- Threshold Detectors