LM2903ITLX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFBGA |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Comparator |
| Packing Method | TR |
| Max Power Dissipation | 568mW |
| Technology | BIPOLAR |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | LM2903 |
| Pin Count | 8 |
| Output Type | CMOS, DTL, ECL, MOS, Open-Collector, TTL |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Nominal Supply Current | 500μA |
| Power Dissipation | 568mW |
| Output Current | 16mA |
| Max Supply Current | 1mA |
| Propagation Delay | 700 ns |
| Quiescent Current | 2.5mA |
| Response Time | 1500 ns |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 100dB |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 250nA |
| Input Bias Current | 250nA |
| Current - Quiescent (Max) | 2.5mA |
| Voltage - Input Offset (Max) | 7mV @ 30V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Current - Output (Typ) | 16mA @ 5V |
| Height | 675μm |
| Length | 2mm |
| Width | 1.3mm |
| Thickness | 675μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM2903ITLX/NOPB Overview
In order to facilitate transportation, it is packaged in 8-WFBGA .The comparator has a CMOS, DTL, ECL, MOS, Open-Collector, TTL output.The part is shipped by Tape & Reel (TR) .Electronic comparator is possible to find the 8 terminals of the comparator.Other Comparator like the device play a important role in the industry.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.The type of the chip can be classified as General Purpose .Currently, it consists of only 2 elements.A total of 8 pins are included.Electronic comparator is recommended to mount the device using type Surface Mount .To ensure proper functioning, the operating temperature should be set to -40°C~85°C .The comparator has 8 pins.You can find more pin-to-pin solutions for your special requirements by searching LM2903 .There is a quiescent current of 2.5mA in this comparator.The PCB or other board has a Surface Mount for mounting.Normal operation of the device requires a nominal supply current of 500μA .Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 1mA .The device can be operated with 5V power supplies.Electronic comparator is possible to input a maximum of 250nA current into the device.A voltage gain of 100dB can be determined from the voltage formula for the part.Often found in ADC circuits, this device is packed in TR .
LM2903ITLX/NOPB Features
CMOS, DTL, ECL, MOS, Open-Collector, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 2.5mA
Voltage Gain: 100dB
LM2903ITLX/NOPB Applications
There are a lot of Texas Instruments LM2903ITLX/NOPB linear comparators applications.
- Window Comparators, Multivibrators
- Threshold Detectors
- High-Speed Differential Line Receiver
- Consumer Medical Electronics
- RC Timers
- Alarm and Monitoring Circuits
- Automatic Test Equipment
- Laptop Computers
- Battery-Powered Electronics
- Wide Range VCO; MOS Clock Timers
