Parameters |
Mount |
Through Hole |
Package / Case |
PDIP |
Number of Pins |
8 |
Weight |
440.409842mg |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Moisture Sensitivity Level (MSL) |
1 |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Max Operating Temperature |
125°C |
Min Operating Temperature |
-40°C |
Subcategory |
Comparator |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Pin Count |
8 |
Output Type |
TTL |
Temperature Grade |
AUTOMOTIVE |
Number of Channels |
2 |
Max Supply Voltage |
30V |
Min Supply Voltage |
2V |
Nominal Supply Current |
1mA |
Max Supply Current |
1mA |
Current - Output |
20mA |
Quiescent Current |
2.5mA |
Response Time |
1.3 μs |
Amplifier Type |
COMPARATOR |
Current - Input Bias |
250nA |
Output Current per Channel |
6mA |
Input Offset Voltage (Vos) |
7mV |
Voltage Gain |
100dB |
Average Bias Current-Max (IIB) |
0.5μA |
Max Dual Supply Voltage |
18V |
Min Dual Supply Voltage |
1V |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
LM2903PE4 Overview
To facilitate transportation, it comes packaged in PDIP .The comparator has a TTL output.8 terminals are found on the comparator.The chip belongs to Comparator .Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.A total of 8 pins are included.The comparator is equipped with 8 pins.There is a quiescent current of 2.5mA in this comparator.There is a Through Hole for mounting it on a PCB or other board.Electronic comparator is recommended that the nominal supply current be 1mA in order to use the device normally.A supply current exceeding 1mA may result in the comparator malfunctioning.Comparator electronics is clear from the voltage formula that the voltage gain of the part is 100dB .Keeping the temperature below 125°C is not recommended.Comparator electronics cannot be operated at a temperature lower than -40°C .In the comparator, the maximum supply voltage is 30V .This comparator allows minimum supply voltage of 2V .2 channels cooperate together to maintain the output quality.There is a high gain COMPARATOR amplifier at the heart of the comparator.There is 20mA output current for this device.
LM2903PE4 Features
TTL output capability
Quiescent Current: 2.5mA
Voltage Gain: 100dB
COMPARATOR amplifier
LM2903PE4 Applications
There are a lot of Texas Instruments LM2903PE4 linear comparators applications.
- Motor drives
- Limit Comparators
- Mobile Phones
- Battery-Powered Electronics
- Notebooks and PDAs
- Zero-Crossing Detectors
- Handheld Instruments
- Security Detection Systems
- Automatic Test Equipment
- Threshold Detectors