Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
8 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
Differential |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Comparator |
Packing Method |
TR |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Base Part Number |
LM2903 |
Pin Count |
8 |
Output Type |
CMOS, MOS, Open-Drain, TTL |
Number of Elements |
2 |
Power Supplies |
5V |
Nominal Supply Current |
1mA |
Output Current |
20mA |
Max Supply Current |
800μA |
Quiescent Current |
2.5mA |
Response Time |
1.3 μs |
Voltage - Supply, Single/Dual (±) |
2V~36V ±1V~18V |
Input Offset Voltage (Vos) |
7mV |
Voltage Gain |
100dB |
Average Bias Current-Max (IIB) |
0.05μA |
Supply Voltage Limit-Max |
36V |
Max Input Current |
250nA |
Input Bias Current |
250nA |
Current - Quiescent (Max) |
2.5mA |
Voltage - Input Offset (Max) |
7mV @ 30V |
Current - Input Bias (Max) |
0.25μA @ 5V |
Height |
1.2mm |
Length |
3mm |
Width |
4.4mm |
Thickness |
1mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
LM2903PWRG3 Overview
A convenient transport package is provided in 8-TSSOP (0.173, 4.40mm Width) .The comparator has a CMOS, MOS, Open-Drain, TTL output.The part is shipped by Tape & Reel (TR) .Electronic comparator is possible to find the 8 terminals of the comparator.The electrical component here belongs to the Comparator family.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.Electronic comparator can be classified as a Differential chip.Currently, it consists of only 2 elements.A total of 8 pins are included.Electronic comparator is recommended to mount the device using type Surface Mount .To ensure proper functioning, the operating temperature should be set to -40°C~125°C .The comparator has a pin count of 8 .In order to find a solution that meets your specific needs, search LM2903 for more pin-to-pin solutions.The comparator presents a quiescent current of 2.5mA volts.The board has a Surface Mount for mounting on a PCB or any other board.Electronic comparator is recommended that the nominal supply current for the device be set to 1mA .Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 800μA .This device requires 5V power supplies to operate.Electronic comparator is possible to input up to 250nA current into the device.Comparator electronics follows that the voltage gain of the part is 100dB .This device is usually used in ADC circuits (packaged in TR ).
LM2903PWRG3 Features
CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 2.5mA
Voltage Gain: 100dB
LM2903PWRG3 Applications
There are a lot of Texas Instruments LM2903PWRG3 linear comparators applications.
- Appliances
- Window Comparators
- Handheld Instruments
- Mobile Communications
- Factory automation & control
- Analog front end
- Battery-Powered Electronics
- Motor drives
- High-Speed Sampling Circuits
- Battery management and protection