LM2903PWRG4
| Parameters | |
|---|---|
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Differential |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM2903 |
| Pin Count | 8 |
| Output Type | CMOS, MOS, Open-Drain, TTL |
| Operating Supply Voltage | 28V |
| Number of Elements | 2 |
| Power Supplies | 5/30V |
| Nominal Supply Current | 500μA |
| Output Current | 20mA |
| Max Supply Current | 500μA |
| Quiescent Current | 2.5mA |
| Response Time | 300 ns |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.05μA |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 250nA |
| Dual Supply Voltage | 9V |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 7mV @ 30V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Weight | 39.008944mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
LM2903PWRG4 Overview
A convenient packaging is provided in the form of 8-TSSOP (0.173, 4.40mm Width) .Output type CMOS, MOS, Open-Drain, TTL is used for this comparator.This device is designed in Tape & Reel (TR) case.Electronic comparator is possible to find the 8 terminals of the comparator.The component belongs to the Comparator family of electrical components.In the presence of a 5V voltage, the comparator is capable of accomplishing a variety of demanding tasks.Electronic comparator can be classified as a Differential chip.A total of 2 elements can be found in it.A total of 8 pins are included.Electronic comparator is recommended to mount the device using type Surface Mount .Electronic comparator is recommended that you set the operating temperature to -40°C~125°C in order to prevent malfunctions.8 pins are present on the comparator.You can find more pin-to-pin solutions by searching LM2903 .A quiescent current of 2.5mA is displayed by this comparator.There is a Surface Mount for mounting it on a PCB or other board.For normal use of the device, the nominal supply current should be 500μA .Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 500μA .In order to run the device, there are only 5/30V power supplies required.There is a maximum current that can be input into the device of 250nA .According to the voltage formula, the part has a voltage gain of 100dB .Normal operation requires 28V operating supply voltage.Comparator electronics is acceptable to pack the device by TR .
LM2903PWRG4 Features
CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 2.5mA
Voltage Gain: 100dB
LM2903PWRG4 Applications
There are a lot of Texas Instruments LM2903PWRG4 linear comparators applications.
- Consumer Medical Electronics
- Motor drives
- General-Purpose Portable Devices
- Automatic Test Equipment
- Ultra-Low Power Systems
- Self-diagnostics
- General Purpose Low Voltage Applications
- Simple Analog-to-Digital Converters (ADCs)
- Factory automation & control
- Infotainment and Clusters
