LM2903QDG4
| Parameters | |
|---|---|
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Differential |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | LM2903 |
| Pin Count | 8 |
| Output Type | CMOS, MOS, Open-Drain, TTL |
| Operating Supply Voltage | 9V |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Nominal Supply Current | 1mA |
| Output Current | 20mA |
| Max Supply Current | 1mA |
| Quiescent Current | 2.5mA |
| Response Time | 1.3 μs |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.05μA |
| Supply Voltage Limit-Max | 36V |
| Dual Supply Voltage | 9V |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 7mV @ 30V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
LM2903QDG4 Overview
For convenience, it is packaged in 8-SOIC (0.154, 3.90mm Width) .There is a comparator of type CMOS, MOS, Open-Drain, TTL output on this device.Ready for shipping in Tube package.There are8 terminals on the comparator.Other Comparator like the device play a important role in the industry.A comparator is capable of completing a variety of demanding tasks when supplied with 5V voltage.This is a typical comparator of type Differential .Currently, it consists of only 2 elements.The device contains 8 pins.The type of mounting recommended is Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -40°C~125°C .This comparator has 8 pins.If you require more pin-to-pin solutions, search LM2903 for more options.This comparator presents a quiescent current of 2.5mA .There is a Surface Mount for mounting it on a PCB or other board.Normal use of the device should require a nominal supply current of 1mA .A current supply greater than 1mA may cause the comparator to malfunction.5V power supplies are enough to run the device.A voltage gain of 100dB can be determined from the voltage formula for the part.A normal operation requires a voltage of 9V .Packed in TR , this device is for general uses (often in ADC circuits).
LM2903QDG4 Features
CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 2.5mA
Voltage Gain: 100dB
LM2903QDG4 Applications
There are a lot of Texas Instruments LM2903QDG4 linear comparators applications.
- General-Purpose, Low-Voltage Applications
- Window Comparators
- Portable and Battery-Powered Systems
- High-Speed Differential Line Receiver
- Portable Battery Monitoring
- Zero-Crossing Detectors
- Window Comparators
- Analog front end
- Automotive
- Lithium ion battery monitoring
