Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 day ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
8 |
Weight |
39.008944mg |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
Series |
Automotive, AEC-Q100 |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
Differential |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Comparator |
Packing Method |
TR |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Base Part Number |
LM2903 |
Pin Count |
8 |
Output Type |
CMOS, MOS, Open-Collector, TTL |
Number of Elements |
2 |
Power Supplies |
5/30V |
Nominal Supply Current |
-5mA |
Output Current |
20mA |
Max Supply Current |
-5mA |
Quiescent Current |
2.5mA |
Response Time |
1.3 μs |
Voltage - Supply, Single/Dual (±) |
2V~36V ±1V~18V |
Input Offset Voltage (Vos) |
7mV |
Voltage Gain |
100dB |
Average Bias Current-Max (IIB) |
0.05μA |
Supply Voltage Limit-Max |
36V |
Max Input Current |
250nA |
Input Bias Current |
250nA |
Current - Quiescent (Max) |
2.5mA |
Voltage - Input Offset (Max) |
7mV @ 5V |
Current - Input Bias (Max) |
0.25μA @ 5V |
Height |
1.2mm |
Length |
3mm |
Width |
4.4mm |
Thickness |
1mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
LM2903QPWRG4Q1 Overview
A convenient packaging is provided in the form of 8-TSSOP (0.173, 4.40mm Width) .The comparator has a CMOS, MOS, Open-Collector, TTL output.The chip is packaged with Tape & Reel (TR) .Electronic comparator is possible to find the 8 terminals of the comparator.Electronic comparator is a part of Comparator family.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.It's a typical Differential comparator.Currently, it consists of only 2 elements.The device is equipped with 8 pins.Electronic comparator is recommended to mount the device using type Surface Mount .Ideally, the operating temperature should be set at -40°C~125°C in order to prevent malfunction.The comparator has 8 pins.If you require more pin-to-pin solutions, search LM2903 for more options.The comparator presents a quiescent current of 2.5mA volts.This component has a Surface Mount mount for mounting to PCBs or other boards.The nominal supply current of the device should be -5mA for normal use.If the current supply exceeds -5mA , the comparator might be damaged.Electronic comparator is sufficient to run the device wElectronic comparatorh 5/30V power supplies.The maximal current your can input into the device is 250nA .Comparator electronics is clear from the voltage formula that the voltage gain of the part is 100dB .The part is from Automotive, AEC-Q100 comparator series.The device is acceptable to pack by TR .
LM2903QPWRG4Q1 Features
CMOS, MOS, Open-Collector, TTL output capability
Differential IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 2.5mA
Voltage Gain: 100dB
LM2903QPWRG4Q1 Applications
There are a lot of Texas Instruments LM2903QPWRG4Q1 linear comparators applications.
- Point of load regulators
- Infotainment and Clusters
- Zero-Crossing Detectors
- Analog front end
- System control and monitoring
- General-Purpose, Low-Voltage Applications
- Wireless Base Stations
- Wearable Devices
- Metering Systems
- Multivibrators and High-Voltage Digital Logic Gates