LM2903QPWRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Weight | 34.50137mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Cut Tape (CT) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Differential |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM2903 |
| Pin Count | 8 |
| Output Type | CMOS, MOS, Open-Collector, TTL |
| Number of Elements | 2 |
| Power Supplies | 5/30V |
| Nominal Supply Current | 1mA |
| Output Current | 20mA |
| Max Supply Current | 1mA |
| Quiescent Current | 2.5mA |
| Response Time | 1.3 μs |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.05μA |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 250nA |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 7mV @ 5V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM2903QPWRQ1 Overview
In order to facilitate transportation, it is packaged in 8-TSSOP (0.173, 4.40mm Width) .The comparator has a CMOS, MOS, Open-Collector, TTL output.As a result, it is designed with Cut Tape (CT) package.You can find 8 terminals of the comparator.The component belongs to the Comparator family of electrical components.The comparator is capable of achieving many demanding tasks when supplied with 5V voltage.It's a typical Differential comparator.This element consists of 2 elements in total.As a result, it contains 8 pins.Electronic comparator is recommended to mount using type Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~125°C to prevent malfunctions.8 pins are available on the comparator.You can find more pin-to-pin solutions for your special requirements by searching LM2903 .The comparator displays a quiescent current of 2.5mA .The PCB or other board can be mounted using the Surface Mount on it.Normally, the nominal supply current should be 1mA when using the device.Current supply exceeding 1mA could cause disfunction of the compartator.The device can be run with 5/30V power supplies.There is a maximum current that can be input into the device of 250nA .The voltage gain of the part is indicated by 100dB in the voltage formula.This part is from the Automotive, AEC-Q100 comparator series.Comparator electronics is packed in TR , and is commonly used in ADC circuComparator electronicss.
LM2903QPWRQ1 Features
CMOS, MOS, Open-Collector, TTL output capability
Differential IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 2.5mA
Voltage Gain: 100dB
LM2903QPWRQ1 Applications
There are a lot of Texas Instruments LM2903QPWRQ1 linear comparators applications.
- Self-diagnostics
- DC/DC and AC/DC power supplies
- Window Comparators, Multivibrators
- Battery-Powered Electronics
- Alarm and Monitoring Circuits
- Consumer Medical Electronics
- Handheld Instruments
- General-Purpose Portable Devices
- Battery management and protection
- Set Top Boxes
