Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 day ago) |
Contact Plating |
Tin |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
Published |
2006 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Subcategory |
Comparator |
Max Power Dissipation |
570mW |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
LM2903 |
Pin Count |
8 |
Output Type |
CMOS, DTL, ECL, MOS, Open-Collector, TTL |
Number of Elements |
2 |
Power Supplies |
5V |
Nominal Supply Current |
1mA |
Power Dissipation |
570mW |
Output Current |
16mA |
Max Supply Current |
1mA |
Quiescent Current |
2.5mA |
Response Time |
1.5 μs |
Voltage - Supply, Single/Dual (±) |
2V~36V ±1V~18V |
Halogen Free |
Halogen Free |
Output Current per Channel |
16mA |
Input Offset Voltage (Vos) |
7mV |
Voltage Gain |
106.02dB |
Average Bias Current-Max (IIB) |
0.5μA |
Supply Voltage Limit-Max |
36V |
Max Input Current |
250nA |
Input Bias Current |
250nA |
Voltage - Input Offset (Max) |
7mV @ 30V |
Current - Input Bias (Max) |
0.25μA @ 5V |
Current - Output (Typ) |
16mA @ 5V |
Height |
1.5mm |
Length |
5mm |
Width |
4mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
LM2903VDR2G Overview
In order to facilitate transportation, it is packaged in 8-SOIC (0.154, 3.90mm Width) .A comparator with a CMOS, DTL, ECL, MOS, Open-Collector, TTL output is used here.This chip is designed with the Tape & Reel (TR) package.8 terminals are found on the comparator.The component belongs to the Comparator family of electrical components.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.Electronic comparator is possible to classify the chip as General Purpose .There are a total of 2 elements in it.A total of 8 pins are included.Electronic comparator is recommended to mount using type Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~125°C in order to prevent malfunctions.8 pins are present on the comparator.Try search LM2903 to get more pin-to-pin solutions for your special needs.The comparator displays a quiescent current of 2.5mA .The nominal supply current of the device should be 1mA for normal use.A current supply greater than 1mA may cause the comparator to malfunction.A power supply of 5V is sufficient for the operation of the device.Electronic comparator is possible to input a maximum current of 250nA into the device.According to the voltage formula, the part has a voltage gain of 106.02dB .
LM2903VDR2G Features
CMOS, DTL, ECL, MOS, Open-Collector, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
LM2903VDR2G Applications
There are a lot of ON Semiconductor LM2903VDR2G linear comparators applications.
- Mobile Phones and Tablets
- System control and monitoring
- Wearable Devices
- General-Purpose, Low-Voltage Applications
- Building automation
- High-Speed Differential Line Receiver
- Metering Systems
- Multivibrators and High-Voltage Digital Logic Gates
- Battery management and protection
- Battery-Powered Electronics