LM2903VN
| Parameters | |
|---|---|
| Lifecycle Status | OBSOLETE (Last Updated: 2 weeks ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Comparator |
| Max Power Dissipation | 570mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LM2903 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | CMOS, DTL, ECL, MOS, Open-Collector, TTL |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Nominal Supply Current | 1mA |
| Power Dissipation | 570mW |
| Output Current | 16mA |
| Max Supply Current | 1mA |
| Quiescent Current | 2.5mA |
| Response Time | 1.5 μs |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Output Current per Channel | 16mA |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.5μA |
| Supply Voltage Limit-Max | 36V |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 7mV @ 30V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Current - Output (Typ) | 16mA @ 5V |
| Height Seated (Max) | 4.45mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM2903VN Overview
In order to make transportation easier, it is packaged in 8-DIP (0.300, 7.62mm) .The comparator has an output type of CMOS, DTL, ECL, MOS, Open-Collector, TTL .This package has been designed with Tube .The comparator has 8 terminals.Electronic comparator is a component of the Comparator family.Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.This is a typical comparator of type General Purpose .In total, it contains 2 elements.The board includes 8 pins.The recommended mounting type is Through Hole .Ideally, the operating temperature should be set at -40°C~125°C in order to prevent malfunction.8 pins are available on the comparator.If you require more pin-to-pin solutions, search LM2903 for more options.As a result, this comparator displays a quiescent current of 2.5mA .The PCB or other board can be mounted using the Through Hole on it.For normal use of the device, the nominal supply current should be 1mA .A current supply greater than 1mA may cause the comparator to malfunction.There is sufficient power to run the device from 5V power supplies.From the voltage formula, the voltage gain of the part is 106.02dB .
LM2903VN Features
CMOS, DTL, ECL, MOS, Open-Collector, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
LM2903VN Applications
There are a lot of ON Semiconductor LM2903VN linear comparators applications.
- Limit Comparators
- Automotive
- Wide Range VCO; MOS Clock Timers
- Battery management and protection
- Appliances
- High-Speed Sampling Circuits
- Notebooks and PDAs
- Mobile Communications
- General Purpose Low Voltage Applications
- Handheld Instruments
