Parameters |
Packaging |
Tape & Reel (TR) |
Series |
Automotive, AEC-Q100 |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
Differential |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Comparator |
Packing Method |
TR |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Base Part Number |
LM2903 |
Pin Count |
8 |
Output Type |
CMOS, MOS, Open-Drain, TTL |
Number of Elements |
2 |
Power Supplies |
5V |
Nominal Supply Current |
500μA |
Output Current |
20mA |
Max Supply Current |
500μA |
Quiescent Current |
2.5mA |
Response Time |
300 ns |
Voltage - Supply, Single/Dual (±) |
2V~36V ±1V~18V |
Output Current per Channel |
6mA |
Input Offset Voltage (Vos) |
7mV |
Voltage Gain |
100dB |
Average Bias Current-Max (IIB) |
0.05μA |
Supply Voltage Limit-Max |
36V |
Max Input Current |
250nA |
Input Bias Current |
250nA |
Voltage - Input Offset (Max) |
7mV @ 5V |
Current - Input Bias (Max) |
0.25μA @ 5V |
Height |
1.2mm |
Length |
3mm |
Width |
4.4mm |
Thickness |
1mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 4 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
8 |
Weight |
34.50137mg |
Operating Temperature |
-40°C~125°C |
LM2903VQPWR Overview
The product is packaged in 8-TSSOP (0.173, 4.40mm Width) for ease of transportation.A comparator with a CMOS, MOS, Open-Drain, TTL output is used here.Ready for shipping in Tape & Reel (TR) package.There are8 terminals on the comparator.The component belongs to the Comparator family of electrical components.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.The type of the chip can be classified as Differential .This element consists of 2 elements in total.The device is equipped with 8 pins.The recommended mounting type is Surface Mount .In order to avoid malfunctions, the operating temperature should be set to -40°C~125°C .Electronic comparator has 8 pins.You can find more pin-to-pin solutions by searching LM2903 .A quiescent current of 2.5mA is displayed by this comparator.The board has a Surface Mount for mounting on a PCB or any other board.Normal operation of the device requires a nominal supply current of 500μA .If the current supply exceeds 500μA , the comparator could malfunction.The device can be run with 5V power supplies.You can input a maximum current of 250nA into this device.Comparator electronics follows that the voltage gain of the part is 100dB .In this case, the part is from the Automotive, AEC-Q100 comparator series.Comparator electronics is packed in TR , and is commonly used in ADC circuComparator electronicss.
LM2903VQPWR Features
CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 2.5mA
Voltage Gain: 100dB
LM2903VQPWR Applications
There are a lot of Texas Instruments LM2903VQPWR linear comparators applications.
- Consumer Medical Electronics
- Battery-Powered Electronics
- Notebooks and PDAs
- Security Detection Systems
- Industrial
- High-Speed Sampling Circuits
- Automotive
- Limit Comparators
- Analog front end
- Automatic Test Equipment