LM2903VQPWRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Weight | 39.008944mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Differential |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM2903 |
| Pin Count | 8 |
| Output Type | CMOS, MOS, Open-Drain, TTL |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Nominal Supply Current | 1mA |
| Output Current | 20mA |
| Max Supply Current | 1mA |
| Quiescent Current | 2.5mA |
| Response Time | 300 ns |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.05μA |
| Supply Voltage Limit-Max | 36V |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 7mV @ 5V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM2903VQPWRG4 Overview
A convenient transport package is provided in 8-TSSOP (0.173, 4.40mm Width) .The comparator has a CMOS, MOS, Open-Drain, TTL output.Electronic comparator is shipped by Tape & Reel (TR) .The comparator has 8 terminals.The electrical component in this case belongs to the Comparator family.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.A comparator of this type is typically of type Differential .This element consists of 2 elements in total.There are 8 pins on this board.The type of mounting recommended is Surface Mount .In order to avoid malfunctions, the operating temperature should be set to -40°C~125°C .The comparator consists of 8 pins.Alternatively, you may search for LM2903 to find more pin-to-pin solutions for your specific needs.In this comparator, the quiescent current is 2.5mA .There is a Surface Mount for mounting it on a PCB or other board.Normally, the nominal supply current should be 1mA .A current supply greater than 1mA may result in the comparator malfunctioning.The device can be run with 5V power supplies.The voltage gain of the part is indicated by 100dB in the voltage formula.This part is from the Automotive, AEC-Q100 comparator series.Often found in ADC circuits, this device is packed in TR .
LM2903VQPWRG4 Features
CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 2.5mA
Voltage Gain: 100dB
LM2903VQPWRG4 Applications
There are a lot of Texas Instruments LM2903VQPWRG4 linear comparators applications.
- Building automation
- Zero-Crossing Detectors
- Window Comparators, Multivibrators
- High-Speed Sampling Circuits
- General Purpose Low Voltage Applications
- Self-diagnostics
- Consumer Medical Electronics
- Motor drives
- Multivibrators and High-Voltage Digital Logic Gates
- Battery-Powered Electronics
