LM2903VQPWRQ1
| Parameters | |
|---|---|
| Number of Pins | 8 |
| Weight | 39.008944mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Differential |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM2903 |
| Pin Count | 8 |
| Output Type | CMOS, MOS, Open-Collector, TTL |
| Number of Elements | 2 |
| Nominal Supply Current | 1mA |
| Output Current | 20mA |
| Max Supply Current | 1mA |
| Quiescent Current | 2.5mA |
| Response Time | 300 ns |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.05μA |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 250nA |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 7mV @ 5V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
LM2903VQPWRQ1 Overview
For convenience, it is packaged in 8-TSSOP (0.173, 4.40mm Width) .A comparator with a CMOS, MOS, Open-Collector, TTL output is used here.The part will be shipped by Tape & Reel (TR) .As you can see, the comparator has8 terminals.The component belongs to the Comparator family of electrical components.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.The type of the chip can be classified as Differential .Electronic comparator has a total of 2 elements.There are 8 pins on this board.A Surface Mount mounting type is recommended.To ensure proper functioning, the operating temperature should be set to -40°C~125°C .There are 8 pins on the comparator.Alternatively, you may search for LM2903 to find more pin-to-pin solutions for your specific needs.The comparator presents a quiescent current of 2.5mA volts.This component has a Surface Mount mount for mounting to PCBs or other boards.Normal operation of the device requires 1mA supply current.A current supply greater than 1mA may cause the comparator to malfunction.Input current to the device cannot exceed 250nA .According to the voltage formula, the part has a voltage gain of 100dB .The part belongs to the Automotive, AEC-Q100 series of comparator parts.With a TR package, this device is designed for general use (usually in ADC circuits).
LM2903VQPWRQ1 Features
CMOS, MOS, Open-Collector, TTL output capability
Differential IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 2.5mA
Voltage Gain: 100dB
LM2903VQPWRQ1 Applications
There are a lot of Texas Instruments LM2903VQPWRQ1 linear comparators applications.
- Building automation
- Infotainment & cluster
- DC/DC and AC/DC power supplies
- High-Speed Differential Line Receiver
- Alarm and Monitoring Circuits
- Analog front end
- System control and monitoring
- Mobile Phones and Tablets
- Power Supervision
- Point of load regulators
