LM2904AVQPWR

30mA per Channel 20nA 50 dB Instrumentational OP Amps 0.5μA 13V 3V~26V ±1.5V~13V LM2904 8 Pins 8-TSSOP (0.173, 4.40mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-LM2904AVQPWR
Package: 8-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 305
Description: 30mA per Channel 20nA 50 dB Instrumentational OP Amps 0.5μA 13V 3V~26V ±1.5V~13V LM2904 8 Pins 8-TSSOP (0.173, 4.40mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 5 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-TSSOP (0.173, 4.40mm Width)
Number of Pins	8
Operating Temperature	-40°C~125°C
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Packing Method	TR
Technology	BIPOLAR
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	5V
Terminal Pitch	0.65mm
Base Part Number	LM2904
Pin Count	8
Operating Supply Voltage	13V
Number of Elements	2
Operating Supply Current	1mA
Nominal Supply Current	1.2mA
Output Current	30mA
Slew Rate	0.3V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	50 dB
Current - Input Bias	20nA
Voltage - Supply, Single/Dual (±)	3V~26V ±1.5V~13V
Output Current per Channel	30mA
Input Offset Voltage (Vos)	1mV
Bandwidth	700 kHz
Unity Gain BW-Nom	700 kHz
Voltage Gain	100dB
Average Bias Current-Max (IIB)	0.5μA
Low-Offset	NO
Frequency Compensation	YES
Low-Bias	NO
Micropower	NO
Programmable Power	NO
Power	NO
Input Offset Current-Max (IIO)	0.05μA
Height	1.2mm
Length	3mm
Width	4.4mm
Thickness	1mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

LM2904AVQPWR Overview

The linear amplifier is packaged in a 8-TSSOP (0.173, 4.40mm Width) case which makes it easy for the consumer to handle. Op amps are General Purpose types of amplifier on the chip. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. During the past two weeks, there have been close to 8 terminations. In this case, there are 8 pins on the board. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. To be specific, this instrumentation amplifier is a type of Operational Amplifier. There are 8 pins on this chip. There is an input offset voltage of 1mV for this buffer op amp. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . As long as the supply current of the chip does not exceed 1mA, this op amp ic can operate. The voltage gain should stay at 100dB. According to the specifications of the buffer op amp, the operating supply voltage is rated at 2. The operating supply voltage of instrumentation amplifier is rated 13V voltage. The instrumentation amplifier is packed in the form of TR.