LM2904ITP/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-UFBGA |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | LM2904 |
| Pin Count | 8 |
| Operating Supply Voltage | 16V |
| Number of Elements | 2 |
| Operating Supply Current | 1mA |
| Nominal Supply Current | 500μA |
| Output Current | 30mA |
| Slew Rate | 0.1V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 50 dB |
| Current - Input Bias | 45nA |
| Voltage - Supply, Single/Dual (±) | 3V~26V ±1.5V~13V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 7mV |
| Gain Bandwidth Product | 1MHz |
| Unity Gain BW-Nom | 1000 kHz |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.05μA |
| Power Supply Rejection Ratio (PSRR) | 50dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 2mV |
| Low-Bias | NO |
| Micropower | NO |
| Max Frequency | 20kHz |
| Programmable Power | NO |
| Wideband | NO |
| Input Offset Current-Max (IIO) | 0.05μA |
| Height | 575μm |
| Length | 0m |
| Width | 0m |
| Thickness | 370μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM2904ITP/NOPB Overview
In order to protect the op amps, a 8-UFBGA case is used. There are two types of operational amplifiers in this circuit. A Tape & Reel (TR) case is used for delivering the op amp. It is estimated that there will be 8 terminations in the next few months. In this case, there are 8 pins on the board. Please take in mind that this instrumentation amplifier should be run at 5V. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. The buffer op amp includes 8 pins. Op amp rates 7mV as input offset voltage. This electrical part should be mounted using type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . It is possible to operate this buffer amplifier from a supply current of 1mA . The voltage gain should stay at 100dB. There are 2 elements in this buffer amplifier. The operating supply voltage of instrumentation amplifier is rated 16V voltage. This linear amplifier pack is based on the TR axis.
LM2904ITP/NOPB Features
8 Pins
supply voltage of 5V
100dB voltage gain
LM2904ITP/NOPB Applications
There are a lot of Texas Instruments LM2904ITP/NOPB Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Instrumentation
- Video amplifiers
- Measurements of Wheatstone bridge
- RF cable systems
- Digital cameras
- Voltage regulation circuit
- Computer workstations
- Multimedia playback equipment
- Test equipment
