LM2904M/NOPB

2 Channels 40mA per Channel 45nA 50 dB Instrumentational OP Amps 0.05μA 16V 3V~26V ±1.5V~13V LM2904 8 Pins 8-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-LM2904M/NOPB
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: -
Stock: 595
Description: 2 Channels 40mA per Channel 45nA 50 dB Instrumentational OP Amps 0.05μA 16V 3V~26V ±1.5V~13V LM2904 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Low-Offset	NO
Frequency Compensation	YES
Voltage - Input Offset	2mV
Low-Bias	NO
Micropower	NO
Programmable Power	NO
Dual Supply Voltage	9V
Input Offset Current-Max (IIO)	0.05μA
Height	1.75mm
Length	4.9mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 2 days ago)
Contact Plating	Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Number of Pins	8
Operating Temperature	-40°C~85°C
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Subcategory	Operational Amplifier
Max Power Dissipation	530mW
Technology	BIPOLAR
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	5V
Base Part Number	LM2904
Pin Count	8
Operating Supply Voltage	16V
Number of Channels	2
Voltage	26V
Operating Supply Current	1mA
Nominal Supply Current	500μA
Power Dissipation	530mW
Output Current	30mA
Max Supply Current	1.2mA
Slew Rate	0.1V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	50 dB
Current - Input Bias	45nA
Voltage - Supply, Single/Dual (±)	3V~26V ±1.5V~13V
Output Current per Channel	40mA
Input Offset Voltage (Vos)	7mV
Bandwidth	1MHz
Unity Gain BW-Nom	1000 kHz
Voltage Gain	100dB
Average Bias Current-Max (IIB)	0.05μA
Power Supply Rejection Ratio (PSRR)	50dB

LM2904M/NOPB Overview

There is a 8-SOIC (0.154, 3.90mm Width) case in which the instrumentation amplifier is packaged. A General Purpose-type buffer amplifier is shown here. The op amp is delivered to you in a Tube case. There have been a total of 8 terminations over the past year. In total, there are 8 pins on this op amp ic. Please take in mind that this instrumentation amplifier should be run at 5V. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. A total of 8 pins are present on the instrumentation amplifier. In terms of input offset voltage, operational amplifier rates 7mV. This electrical part should be mounted using type Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~85°C . A supply current of 1mA can be used to operate this linear amplifier. There should be no change in the voltage gain. There are 2 channels on the operational amplifiers. The operating supply voltage of the buffer op amp is rated at 16V.