LM2904NG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 1 day ago) |
| Contact Plating | Tin |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Weight | 4.535924g |
| Operating Temperature | -40°C~105°C |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | RAIL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LM2904 |
| Pin Count | 8 |
| Operating Supply Voltage | 16V |
| Number of Channels | 2 |
| Operating Supply Current | 1.5mA |
| Nominal Supply Current | 1.2mA |
| Output Current | 40mA |
| Slew Rate | 0.6V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 50 dB |
| Current - Input Bias | 45nA |
| Voltage - Supply, Single/Dual (±) | 3V~32V ±1.5V~16V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 7mV |
| Bandwidth | 1MHz |
| Unity Gain BW-Nom | 1000 kHz |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.5μA |
| Power Supply Rejection Ratio (PSRR) | 50dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 2mV |
| Max Frequency | 20kHz |
| Height | 4.953mm |
| Length | 10.0076mm |
| Width | 7.112mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LM2904NG Overview
It is packaged in an 8-DIP (0.300, 7.62mm)-case that protects the operational amplifiers from damage. General Purpose-type instrumentation amplifiers are used in this application. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. The number of terminations approaches 8. A total of 8 pins are located on this board. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. It should be noted that this op amp is a type of Operational Amplifier device. 8 pins are available on the instrumentation amplifier. In terms of input offset voltage, operational amplifier rates 7mV. For this electrical component, the recommended mounting type is Through Hole, which is the most common. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~105°C. As long as the supply current of the chip does not exceed 1.5mA, this op amp ic can operate. It is recommended to keep the voltage gain at 100dB at all times. There are a total of 2 channels available on the op amps. The operating supply voltage of instrumentation amplifier is rated 16V voltage. An buffer amplifier is packed in a RAIL-shape according to the design.
LM2904NG Features
8 Pins
supply voltage of 5V
100dB voltage gain
LM2904NG Applications
There are a lot of ON Semiconductor LM2904NG Instrumentational OP Amps applications.
- E-book readers
- Test and measurement instruments
- Radar
- Power transmission
- High/low-pass filter circuit
- Portable docking station
- Broadcasting
- High-frequency data acquisition systems
- Video conversion and routing
- Vehicle electronics
