LM2904VQDRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | LM2904 |
| Pin Count | 8 |
| Operating Supply Voltage | 13V |
| Number of Elements | 2 |
| Operating Supply Current | 1mA |
| Nominal Supply Current | 1.2mA |
| Output Current | 30mA |
| Slew Rate | 0.3V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 20nA |
| Voltage - Supply, Single/Dual (±) | 3V~26V ±1.5V~13V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 7mV |
| Bandwidth | 700 kHz |
| Unity Gain BW-Nom | 700 kHz |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.5μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 3mV |
| Low-Bias | NO |
| Micropower | NO |
| Programmable Power | NO |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.05μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM2904VQDRG4 Overview
In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. Buffer amps of this type are called General Purpose-types. Linear amplifier is delivered in a Tape & Reel (TR) case. It is estimated that there will be at least 8 terminations this year. The pins on this board total to 8 in total. Please take in mind that op amp should be run at 5V. It should be noted that this op amp is a type of Operational Amplifier device. Linear amplifier includes 8 pins. Regarding input offset voltage, op amp rates 7mV. For this electrical component, Surface Mount is the recommended mounting type. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. An 1mA volt supply current is needed for this linear amplifier to operate. Op amp is a member of the 100dB's 100dB family. A voltage rating of 2 is indicated for the op amp's operating supply voltage. The operating supply voltage of instrumentation amplifier is rated 13V voltage. For the packing of the instrumentation amplifier, TR is adopted.
LM2904VQDRG4 Features
8 Pins
supply voltage of 5V
100dB voltage gain
LM2904VQDRG4 Applications
There are a lot of Texas Instruments LM2904VQDRG4 Instrumentational OP Amps applications.
- earphone
- Signal transformation
- High input resistance broadband
- Wireless base stations
- pH (acidity)
- Fission chambers
- Cinema or auditorium audio system
- Power transmission
- Portable media players
- Professional videography
