LM293AD
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~105°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Max Power Dissipation | 830mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LM293 |
| Pin Count | 8 |
| Output Type | CMOS, DTL, ECL, MOS, Open-Collector, TTL |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Nominal Supply Current | 1mA |
| Power Dissipation | 830mW |
| Output Current | 18mA |
| Max Supply Current | 1mA |
| Quiescent Current | 2.5mA |
| Response Time | 1.3 μs |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Output Current per Channel | 100pA |
| Input Offset Voltage (Vos) | 2mV |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.3μA |
| Supply Voltage Limit-Max | 36V |
| Input Bias Current | 100nA |
| Voltage - Input Offset (Max) | 2mV @ 30V |
| Current - Input Bias (Max) | 0.1μA @ 5V |
| Current - Output (Typ) | 18mA @ 5V |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM293AD Overview
The product is packaged in 8-SOIC (0.154, 3.90mm Width) in order to facilitate transportation.There is a CMOS, DTL, ECL, MOS, Open-Collector, TTL output type for this comparator.This device is designed in Tube case.You can find 8 terminals of the comparator.The component belongs to the Comparator family of electrical components.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 5V .Speaking of types, this is a typical General Purpose comparator.This is a 2 element comparator.The pinout of the component starts from 8 pins it has.Electronic comparator is recommended to mount using type Surface Mount .As a precaution, it is recommended to set the operating temperature to -40°C~105°C to prevent malfunctions.Electronic comparator has 8 pins.In order to find a solution that meets your specific needs, search LM293 for more pin-to-pin solutions.A quiescent current of 2.5mA is observed in this comparator.The board has a Surface Mount for mounting on a PCB or any other board.Normal use of the device should require a nominal supply current of 1mA .If the current supply exceeds 1mA , the comparator might be damaged.Electronic comparator is sufficient to run the device wElectronic comparatorh 5V power supplies.The voltage gain of the part is indicated by 106.02dB in the voltage formula.
LM293AD Features
CMOS, DTL, ECL, MOS, Open-Collector, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~105°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
LM293AD Applications
There are a lot of STMicroelectronics LM293AD linear comparators applications.
- Ultra-Low Power Systems
- Metering Systems
- Infotainment and Clusters
- Mobile Communications
- High-Speed Differential Line Receiver
- Battery management and protection
- Appliances
- Laptop Computers
- Self-diagnostics
- Alarm and Monitoring Circuits
