LM293ADT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~105°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Max Power Dissipation | 830mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LM293 |
| Pin Count | 8 |
| Output Type | CMOS, DTL, ECL, MOS, Open-Collector, TTL |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Nominal Supply Current | 1mA |
| Power Dissipation | 830mW |
| Output Current | 18mA |
| Max Supply Current | 1mA |
| Quiescent Current | 2.5mA |
| Response Time | 1.3 μs |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Output Current per Channel | 100pA |
| Input Offset Voltage (Vos) | 2mV |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.3μA |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 100nA |
| Input Bias Current | 100nA |
| Voltage - Input Offset (Max) | 2mV @ 30V |
| Current - Input Bias (Max) | 0.1μA @ 5V |
| Natural Thermal Resistance | 125 °C/W |
| Current - Output (Typ) | 18mA @ 5V |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM293ADT Overview
To facilitate transportation, it comes packaged in 8-SOIC (0.154, 3.90mm Width) .The comparator has a type CMOS, DTL, ECL, MOS, Open-Collector, TTL output.The part is shipped by Tape & Reel (TR) .The comparator has a total of 8 terminals.Other Comparator like the device play a important role in the industry.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.When it comes to types, this comparator is a typical General Purpose .In total, it contains 2 elements.There are 8 pins on this board.The recommended mounting method is Surface Mount .Electronic comparator is recommended that you set the operating temperature to -40°C~105°C in order to prevent malfunctions.This comparator has 8 pins.In case you are looking for more pin-to-pin solutions, you may want to search LM293 .A quiescent current of 2.5mA is displayed by this comparator.There is a Surface Mount for mounting it on a PCB or other board.Electronic comparator is recommended that the nominal supply current for the device be set to 1mA .A supply current exceeding 1mA may result in the comparator malfunctioning.A power supply of 5V is sufficient for the operation of the device.You can input a maximum current of 100nA into this device.Based on the voltage formula, the voltage gain of the part is 106.02dB .
LM293ADT Features
CMOS, DTL, ECL, MOS, Open-Collector, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~105°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
LM293ADT Applications
There are a lot of STMicroelectronics LM293ADT linear comparators applications.
- Ultra-Low Power Systems
- Mobile Phones
- Analog front end
- Window Comparators
- General-Purpose, Low-Voltage Applications
- Power management
- Security Detection Systems
- Pulse, Squarewave, and Time Delay Generators
- Set Top Boxes
- Mobile Phones and Tablets
