LM293DG
| Parameters | |
|---|---|
| Dual Supply Voltage | 3V |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 5mV @ 30V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Current - Output (Typ) | 16mA @ 5V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | LIFETIME (Last Updated: 3 days ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -25°C~85°C |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Max Power Dissipation | 570mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LM293 |
| Pin Count | 8 |
| Output Type | CMOS, DTL, ECL, MOS, Open-Collector, TTL |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Nominal Supply Current | 1mA |
| Power Dissipation | 570mW |
| Output Current | 16mA |
| Max Supply Current | 1mA |
| Quiescent Current | 2.5mA |
| Response Time | 1.3 μs |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 100pA |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.4μA |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 250nA |
LM293DG Overview
In order to facilitate transportation, it is packaged in 8-SOIC (0.154, 3.90mm Width) .The comparator has a type CMOS, DTL, ECL, MOS, Open-Collector, TTL output.Electronic comparator is shipped by Tube .There are8 terminals on the comparator.The component belongs to the Comparator family of electrical components.In the presence of a 5V voltage, the comparator is capable of accomplishing a variety of demanding tasks.It's a typical General Purpose comparator.The pinout of the component starts from 8 pins it has.A Surface Mount mounting type is recommended.In order to avoid malfunctions, the operating temperature should be set to -25°C~85°C .Electronic comparator has 8 pins.In case you are looking for more pin-to-pin solutions, you may want to search LM293 .This comparator presents a quiescent current of 2.5mA .Normal use of the device should require a nominal supply current of 1mA .A current supply greater than 1mA may result in the comparator malfunctioning.The device can be run with 5V power supplies.Electronic comparator is possible to input a maximum current of 250nA into the device.The voltage formula shows that the part has a voltage gain of 106.02dB .
LM293DG Features
CMOS, DTL, ECL, MOS, Open-Collector, TTL output capability
General Purpose IC
Operates under -25°C~85°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
LM293DG Applications
There are a lot of ON Semiconductor LM293DG linear comparators applications.
- Laptop Computers
- Lithium ion battery monitoring
- Alarm and Monitoring Circuits
- RC Timers
- Appliances
- Mobile Phones and Tablets
- Wearable Devices
- High-Speed Differential Line Receiver
- Portable and Battery-Powered Systems
- Handheld Instruments
