LM293DMR2
| Parameters | |
|---|---|
| Lifecycle Status | OBSOLETE (Last Updated: 20 hours ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -25°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Comparator |
| Max Power Dissipation | 570mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LM293 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | CMOS, DTL, ECL, MOS, Open-Collector, TTL |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Nominal Supply Current | 1mA |
| Output Current | 16mA |
| Max Supply Current | 1mA |
| Quiescent Current | 2.5mA |
| Response Time | 1.5 μs |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Output Current per Channel | 100pA |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.4μA |
| Supply Voltage Limit-Max | 36V |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 5mV @ 30V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Current - Output (Typ) | 16mA @ 5V |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM293DMR2 Overview
Electronic comparator is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) for convenient transportation.The comparator has a type CMOS, DTL, ECL, MOS, Open-Collector, TTL output.Electronic comparator is shipped by Tape & Reel (TR) .The comparator has 8 terminals.The component belongs to the Comparator family of electrical components.With a 5V voltage supply, the comparator can perform multiple demanding tasks.This is a typical comparator of type General Purpose .This element consists of 2 elements in total.There are 8 pins on this board.Surface Mount universial mout for easy adapting.Electronic comparator is recommended that you set the operating temperature to -25°C~85°C in order to prevent malfunctions.This comparator has 8 pins.In order to find a solution that meets your specific needs, search LM293 for more pin-to-pin solutions.There is a quiescent current of 2.5mA in this comparator.The board has a Surface Mount for mounting on a PCB or any other board.Electronic comparator is recommended that the nominal supply current of the device be 1mA .The compartator could be damaged if the current supply exceeds 1mA .5V power supplies are enough to run the device.According to the voltage formula, the part has a voltage gain of 106.02dB .
LM293DMR2 Features
CMOS, DTL, ECL, MOS, Open-Collector, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -25°C~85°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
LM293DMR2 Applications
There are a lot of ON Semiconductor LM293DMR2 linear comparators applications.
- Factory automation & control
- General Purpose Low Voltage Applications
- Handheld Instruments
- High-Speed Differential Line Receiver
- Multivibrators and High-Voltage Digital Logic Gates
- Analog front end
- Wide Range VCO; MOS Clock Timers
- Alarm and Monitoring Circuits
- Wearable Devices
- Window Comparators, Multivibrators
