LM293DRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -25°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Differential |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | LM293 |
| Pin Count | 8 |
| Output Type | CMOS, MOS, Open-Drain, TTL |
| Operating Supply Voltage | 28V |
| Number of Elements | 2 |
| Power Supplies | 5/30V |
| Nominal Supply Current | 500μA |
| Output Current | 20mA |
| Max Supply Current | 500μA |
| Quiescent Current | 2.5mA |
| Response Time | 300 ns |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.05μA |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 250nA |
| Dual Supply Voltage | 9V |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 5mV @ 30V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM293DRG4 Overview
A convenient packaging is provided in the form of 8-SOIC (0.154, 3.90mm Width) .A comparator with an output type of CMOS, MOS, Open-Drain, TTL is being used.The part will be shipped by Tape & Reel (TR) .As you can see, the comparator has8 terminals.Electronic comparator is a component of the Comparator family.In the presence of a 5V voltage, the comparator is capable of accomplishing a variety of demanding tasks.In terms of type, this is a typical Differential comparator.There are a total of 2 elements in it.Electronic comparator includes 8 pins.The recommended mounting type is Surface Mount .To ensure proper functioning, the operating temperature should be set to -25°C~85°C .There are 8 pins on the comparator.In case you are looking for more pin-to-pin solutions, you may want to search LM293 .There is a quiescent current of 2.5mA in this comparator.This component has a Surface Mount mount for mounting to PCBs or other boards.For normal use of the device, the nominal supply current should be 500μA .Current supply exceeding 500μA could cause disfunction of the compartator.The device can be powered by 5/30V power supplies.There is a maximum current that can be input into the device of 250nA .According to the voltage formula, the part has a voltage gain of 106.02dB .Normal operation requires 28V operating supply voltage.The device is packaged in TR and is often used in ADC circuits.
LM293DRG4 Features
CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 2 elements
Operates under -25°C~85°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
LM293DRG4 Applications
There are a lot of Texas Instruments LM293DRG4 linear comparators applications.
- Point of load regulators
- Current and voltage sensing
- Battery-Powered Electronics
- Battery management and protection
- Handheld Instruments
- Window Comparators
- Set Top Boxes
- General Purpose Low Voltage Applications
- High-Speed Differential Line Receiver
- Portable Battery Monitoring
