Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Contact Plating |
Lead, Tin |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
TO-205AA, TO-5-8 Metal Can |
Number of Pins |
8 |
Operating Temperature |
-25°C~85°C |
Packaging |
Box |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Subcategory |
Comparator |
Max Power Dissipation |
660mW |
Technology |
BIPOLAR |
Terminal Position |
BOTTOM |
Terminal Form |
WIRE |
Number of Functions |
2 |
Supply Voltage |
5V |
Base Part Number |
LM293 |
Pin Count |
8 |
Output Type |
CMOS, DTL, ECL, MOS, Open-Collector, TTL |
Number of Elements |
2 |
Power Supplies |
5V |
Nominal Supply Current |
500μA |
Power Dissipation |
660mW |
Output Current |
16mA |
Max Supply Current |
1mA |
Propagation Delay |
700 ns |
Quiescent Current |
2.5mA |
Response Time |
1300 ns |
Voltage - Supply, Single/Dual (±) |
2V~36V ±1V~18V |
Input Offset Voltage (Vos) |
5mV |
Voltage Gain |
106.02dB |
Supply Voltage Limit-Max |
36V |
Max Input Current |
250nA |
Input Bias Current |
250nA |
Current - Quiescent (Max) |
2.5mA |
Voltage - Input Offset (Max) |
5mV @ 30V |
Current - Input Bias (Max) |
0.25μA @ 5V |
Current - Output (Typ) |
16mA @ 5V |
Height |
5.72mm |
Length |
9.08mm |
Width |
9.08mm |
Thickness |
4.4mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
LM293H Overview
Electronic comparator is packaged in TO-205AA, TO-5-8 Metal Can for convenient transportation.Output type CMOS, DTL, ECL, MOS, Open-Collector, TTL is used for this comparator.This chip is designed with the Box package.The comparator has 8 terminals.Electronic comparator is a component of the Comparator family.The comparator is capable of achieving many demanding tasks when supplied with 5V voltage.A comparator of this type is typically of type General Purpose .The total number of elements is 2 .A total of 8 pins are included.The type of mounting recommended is Through Hole .The operating temperature should be set to -25°C~85°C to avoid mal-function.The comparator has a pin count of 8 .In case you are looking for more pin-to-pin solutions, you may want to search LM293 .A quiescent current of 2.5mA is observed in this comparator.A Through Hole is provided for mounting it onto a PCB or another board.Normal use of the device should require a nominal supply current of 500μA .A supply current exceeding 1mA may result in the comparator malfunctioning.The device can be powered by 5V power supplies.You are allowed to input a maximum current of 250nA into the device.According to the voltage formula, the part has a voltage gain of 106.02dB .
LM293H Features
CMOS, DTL, ECL, MOS, Open-Collector, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -25°C~85°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
LM293H Applications
There are a lot of Texas Instruments LM293H linear comparators applications.
- Body Control Modules
- Limit Comparators
- Wearable Devices
- Consumer Medical Electronics
- Battery management and protection
- Battery-Powered Electronics
- Portable Battery Monitoring
- General-Purpose, Low-Voltage Applications
- Zero-Crossing Detectors
- Factory automation & control