LM293H/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-205AA, TO-5-8 Metal Can |
| Number of Pins | 8 |
| Operating Temperature | -25°C~85°C |
| Packaging | Bulk |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Max Power Dissipation | 660mW |
| Technology | BIPOLAR |
| Terminal Position | BOTTOM |
| Terminal Form | WIRE |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | LM293 |
| Pin Count | 8 |
| Output Type | CMOS, DTL, ECL, MOS, Open-Collector, TTL |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Nominal Supply Current | 500μA |
| Power Dissipation | 660mW |
| Output Current | 16mA |
| Max Supply Current | 1mA |
| Response Time | 1300 ns |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 106.02dB |
| Supply Voltage Limit-Max | 36V |
| Input Bias Current | 250nA |
| Current - Quiescent (Max) | 2.5mA |
| Voltage - Input Offset (Max) | 5mV @ 30V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Current - Output (Typ) | 16mA @ 5V |
| Propagation Delay (Max) | 700ns |
| Height | 5.72mm |
| Length | 9.08mm |
| Width | 9.08mm |
| Thickness | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
LM293H/NOPB Overview
To facilitate transportation, it comes packaged in TO-205AA, TO-5-8 Metal Can .This comparator is of the CMOS, DTL, ECL, MOS, Open-Collector, TTL output type.The part is shipped by Bulk .8 terminals are found on the comparator.The component belongs to the Comparator family of electrical components.With a 5V voltage supply, the comparator can perform multiple demanding tasks.In general, the chip type can be classified as General Purpose .Currently, it consists of only 2 elements.The device includes 8 pins.The recommended mounting method is Through Hole .Electronic comparator is recommended that you set the operating temperature to -25°C~85°C in order to prevent malfunctions.8 pins are available on the comparator.You can find more pin-to-pin solutions for your special requirements by searching LM293 .The PCB or other board can be mounted using the Through Hole on it.Normal use of the device should require a nominal supply current of 500μA .A current supply greater than 1mA may cause the comparator to malfunction.In order to run the device, there are only 5V power supplies required.In accordance with the voltage formula, the part's voltage gain is 106.02dB .
LM293H/NOPB Features
CMOS, DTL, ECL, MOS, Open-Collector, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -25°C~85°C
Voltage Gain: 106.02dB
LM293H/NOPB Applications
There are a lot of Texas Instruments LM293H/NOPB linear comparators applications.
- Multivibrators and High-Voltage Digital Logic Gates
- Motor drives
- Alarm and Monitoring Circuits
- Window Comparators
- Consumer Medical Electronics
- Wide Range VCO; MOS Clock Timers
- Threshold Detectors
- Self-diagnostics
- Ultra-Low Power Systems
- Mobile Phones and Tablets
