LM293MDREP
| Parameters | |
|---|---|
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Differential |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | LM293 |
| Pin Count | 8 |
| Output Type | CMOS, MOS, Open-Collector, TTL |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Nominal Supply Current | 1mA |
| Output Current | 20mA |
| Max Supply Current | 500μA |
| Quiescent Current | 2.5mA |
| Response Time | 300 ns |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.05μA |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 250nA |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 5mV @ 30V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
LM293MDREP Overview
The product is packaged in 8-SOIC (0.154, 3.90mm Width) for ease of transportation.This comparator is of the CMOS, MOS, Open-Collector, TTL output type.We ship the part through Tape & Reel (TR) .There are 8 terminals on the comparator.The electrical component here belongs to the Comparator family.A comparator is capable of completing a variety of demanding tasks when supplied with 5V voltage.Speaking of types, this is a typical Differential comparator.A total of 2 elements can be found in it.There are 8 pins on this board.The recommended mounting method is Surface Mount .A temperature setting of -55°C~125°C should be used for the operating temperature in order to prevent malfunctions.There are 8 pins on the comparator.You can find more pin-to-pin solutions for your special requirements by searching LM293 .As a result, this comparator displays a quiescent current of 2.5mA .The board has a Surface Mount for mounting on a PCB or any other board.Electronic comparator is recommended that the nominal supply current be 1mA in order to use the device normally.A supply current exceeding 500μA may result in the comparator malfunctioning.The device can be operated with 5V power supplies.Input current to the device is limited to 250nA .According to the voltage formula, the part has a voltage gain of 106.02dB .This device can be used in general (for example, in ADC circuits). It is packaged in TR .
LM293MDREP Features
CMOS, MOS, Open-Collector, TTL output capability
Differential IC
Employing 2 elements
Operates under -55°C~125°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
LM293MDREP Applications
There are a lot of Texas Instruments LM293MDREP linear comparators applications.
- Window Comparators, Multivibrators
- Threshold Detectors
- Hand-Held Electronics
- Handheld Instruments
- Simple Analog-to-Digital Converters (ADCs)
- Portable and Battery-Powered Systems
- Mobile Phones and Tablets
- Set Top Boxes
- Motor drives
- Multivibrators and High-Voltage Digital Logic Gates
