LM293P
| Parameters | |
|---|---|
| Voltage - Input Offset (Max) | 5mV @ 30V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Current - Output (Typ) | 20mA |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 440.409842mg |
| Operating Temperature | -25°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Differential |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Max Power Dissipation | 660mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | LM293 |
| Pin Count | 8 |
| Output Type | CMOS, MOS, Open-Drain, TTL |
| Power Supplies | 5/30V |
| Number of Circuits | 2 |
| Nominal Supply Current | 1mA |
| Output Current | 20mA |
| Max Supply Current | 500μA |
| Quiescent Current | 2.5mA |
| Response Time | 300 ns |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.05μA |
| Supply Voltage Limit-Max | 36V |
| Dual Supply Voltage | 9V |
| Input Bias Current | 250nA |
LM293P Overview
A convenient transport package is provided in 8-DIP (0.300, 7.62mm) .Output type of this comparator is CMOS, MOS, Open-Drain, TTL .The part will be shipped by Tube .The comparator has 8 terminals.The chip belongs to Comparator .This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 5V .A comparator of this type is typically of type Differential .Electronic comparator includes 8 pins.The type of mounting recommended is Through Hole .In order to avoid malfunctions, the operating temperature should be set to -25°C~85°C .8 pins are available on the comparator.In case you are looking for more pin-to-pin solutions, you may want to search LM293 .A quiescent current of 2.5mA is observed in this comparator.The board has a Through Hole for mounting on a PCB or any other board.Normally, the nominal supply current should be 1mA when using the device.An excess of current supply over 500μA could result in malfunction of the comparator.A power supply of 5/30V is sufficient for the operation of the device.A voltage gain of 106.02dB can be determined from the voltage formula for the part.
LM293P Features
CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Operates under -25°C~85°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
LM293P Applications
There are a lot of Texas Instruments LM293P linear comparators applications.
- General-Purpose Portable Devices
- Simple Analog-to-Digital Converters (ADCs)
- Building automation
- Factory automation & control
- Battery-Powered Electronics
- Automatic Test Equipment
- Threshold Detectors
- Portable and Battery-Powered Systems
- Laptop Computers
- Window Comparators
