Parameters |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Mount |
Through Hole |
Package / Case |
PDIP |
Number of Pins |
8 |
Weight |
440.409842mg |
JESD-609 Code |
e3 |
Moisture Sensitivity Level (MSL) |
1 |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-25°C |
Subcategory |
Comparator |
Packing Method |
TUBE |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Pin Count |
8 |
Output Type |
TTL |
Temperature Grade |
OTHER |
Number of Channels |
2 |
Max Supply Voltage |
30V |
Min Supply Voltage |
2V |
Nominal Supply Current |
1mA |
Max Supply Current |
500μA |
Current - Output |
20mA |
Quiescent Current |
2.5mA |
Response Time |
300 ns |
Amplifier Type |
COMPARATOR |
Current - Input Bias |
250nA |
Output Current per Channel |
6mA |
Input Offset Voltage (Vos) |
5mV |
Voltage Gain |
106.02dB |
Average Bias Current-Max (IIB) |
0.05μA |
Max Dual Supply Voltage |
18V |
Min Dual Supply Voltage |
1V |
Max Input Current |
250nA |
Height |
5.08mm |
Length |
9.81mm |
Width |
6.35mm |
Thickness |
3.9mm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
LM293PE4 Overview
A convenient transport package is provided in PDIP .Output type TTL is used for this comparator.There are 8 terminals on the comparator.Electronic comparator is a component of the Comparator family.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.As a result, it contains 8 pins.There are 8 pins on the comparator.As a result, this comparator displays a quiescent current of 2.5mA .Mounting on PCBs or other boards is easy with the Through Hole .The nominal supply current of the device should be 1mA for normal use.The compartator could be damaged if the current supply exceeds 500μA .You can input a maximum current of 250nA into this device.Comparator electronics follows that the voltage gain of the part is 106.02dB .An increase in temperature over 85°C is not recommended.Temperature lower than -25°C is not suitable for the it.In the comparator, the maximum supply voltage is 30V .Comparator electronics is possible to supply this comparator wComparator electronicsh a voltage as low as 2V .To maintain output quality, 2 channels cooperate.In essence, the comparator has a COMPARATOR amplifier with a high gain.The device is acceptable to pack by TUBE .Comparator electronics has an output current rated at 20mA .
LM293PE4 Features
TTL output capability
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
COMPARATOR amplifier
LM293PE4 Applications
There are a lot of Texas Instruments LM293PE4 linear comparators applications.
- General-Purpose, Low-Voltage Applications
- Battery management and protection
- Appliances
- Battery-Powered Electronics
- Portable Battery Monitoring
- High-Speed Differential Line Receiver
- Threshold Detectors
- Factory automation & control
- Lithium ion battery monitoring
- Battery-Powered Electronics