LM293PT
| Parameters | |
|---|---|
| Pin Count | 8 |
| Output Type | CMOS, DTL, ECL, MOS, Open-Collector, TTL |
| Number of Elements | 2 |
| Nominal Supply Current | 1mA |
| Power Dissipation | 625mW |
| Output Current | 18mA |
| Max Supply Current | 1mA |
| Quiescent Current | 2.5mA |
| Response Time | 1.3 μs |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Output Current per Channel | 100pA |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.4μA |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 250nA |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 5mV @ 30V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Natural Thermal Resistance | 85 °C/W |
| Current - Output (Typ) | 18mA @ 5V |
| Length | 4.4mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~105°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Comparator |
| Max Power Dissipation | 625mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LM293 |
LM293PT Overview
The product is packaged in 8-TSSOP (0.173, 4.40mm Width) to facilitate transportation.This comparator is of the CMOS, DTL, ECL, MOS, Open-Collector, TTL output type.The part will be shipped by Tape & Reel (TR) .Electronic comparator is possible to find the 8 terminals of the comparator.The chip belongs to Comparator .In the presence of a 5V voltage, the comparator is capable of accomplishing a variety of demanding tasks.The type of the chip can be classified as General Purpose .Currently, it consists of only 2 elements.The board includes 8 pins.The recommended mounting type is Surface Mount .Ideally, the operating temperature should be set at -40°C~105°C in order to prevent malfunction.There are 8 pins on the comparator.You can find more pin-to-pin solutions by searching LM293 .In this comparator, the quiescent current is 2.5mA .There is a Surface Mount on the board for mounting to a PCB or other board.Electronic comparator is recommended that the nominal supply current for the device be set to 1mA .If the current supply exceeds 1mA , the comparator could malfunction.Input current to the device is limited to 250nA .According to the voltage formula, the part has a voltage gain of 106.02dB .
LM293PT Features
CMOS, DTL, ECL, MOS, Open-Collector, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~105°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
LM293PT Applications
There are a lot of STMicroelectronics LM293PT linear comparators applications.
- Industrial
- Power Supervision
- Self-diagnostics
- Analog front end
- Mobile Communications
- Mobile Phones and Tablets
- General-Purpose, Low-Voltage Applications
- Battery-Powered Electronics
- Automotive
- Zero-Crossing Detectors
