LM301ADG
| Parameters | |
|---|---|
| Number of Channels | 1 |
| Operating Supply Current | 1.8mA |
| Nominal Supply Current | 1.8mA |
| Power Dissipation | 625mW |
| Output Current | 10mA |
| Slew Rate | 0.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 70nA |
| Voltage - Supply, Single/Dual (±) | ±5V~18V |
| Input Offset Voltage (Vos) | 7.5mV |
| Bandwidth | 1MHz |
| Gain Bandwidth Product | 1MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 1000 kHz |
| Voltage Gain | 104.08dB |
| Average Bias Current-Max (IIB) | 0.03μA |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Low-Offset | NO |
| Frequency Compensation | NO |
| Voltage - Input Offset | 2mV |
| Bias Current-Max (IIB) @25C | 0.25μA |
| Height | 1.4986mm |
| Length | 4.9784mm |
| Width | 3.9878mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | RAIL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LM301A |
| Pin Count | 8 |
| Power Supplies | +-5/+-20V |
LM301ADG Overview
There is a 8-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. Buffer amps of this type are called General Purpose-types. Instrumentation amplifier is delivered in a Tube case. We are approaching the 8h termination of the year. It consists of a total of 8 pins in total. Please take in mind that op amp should be run at 15V. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. 8 pins are located on the operational amplifiers. The input offset voltage is 7.5mV. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around 0°C~70°C . Operational amplifier can operate supply current at 1.8mA. It is recommended to keep the voltage gain at 104.08dB at all times. There are a total of 1 channels available on the op amps. It is used RAIL to pack the op amps.
LM301ADG Features
8 Pins
supply voltage of 15V
104.08dB voltage gain
LM301ADG Applications
There are a lot of ON Semiconductor LM301ADG Instrumentational OP Amps applications.
- Multimedia playback equipment
- Oscilloscopes
- Power transmission
- E-book readers
- Blood pressure sensors
- Differentiator circuits
- Fast A/D and D/A converters
- Video amplifiers
- Comparator
- Video conversion and routing
