LM301AN/NOPB
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 4.535924g |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | RAIL |
| Max Power Dissipation | 500mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Base Part Number | LM301 |
| Pin Count | 8 |
| Operating Supply Voltage | 18V |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Nominal Supply Current | 1.8mA |
| Power Dissipation | 500mW |
| Output Current | 25mA |
| Max Supply Current | 3mA |
| Slew Rate | 0.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 70nA |
| Voltage - Supply, Single/Dual (±) | 10V~36V ±5V~18V |
| Input Offset Voltage (Vos) | 7.5mV |
| Bandwidth | 1MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 1000 kHz |
| Voltage Gain | 104.08dB |
| Average Bias Current-Max (IIB) | 0.3μA |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Low-Offset | NO |
| Frequency Compensation | NO |
| Voltage - Input Offset | 2mV |
| Bias Current-Max (IIB) @25C | 0.25μA |
| Dual Supply Voltage | 9V |
| Height | 3.3mm |
| Length | 9.27mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM301AN/NOPB Overview
The linear amplifier is packaged in a 8-DIP (0.300, 7.62mm) case. An op amp of this type is a General Purpose-type. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. It is estimated that there will be 8 terminations in the next few months. It consists of a total of 8 pins in total. It is important to remember that this op amp should be operated at a voltage of 15V volts. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. In total, the buffer amplifier consists of 8 pins. With regards to the offset voltage of the input, buffer amplifier is rated at 7.5mV. This electronic part is recommended for mounting type Through Hole. In relation to the operating temperature of this buffer op amp, it works well at an average of 0°C~70°C . 104.08dB should remain the voltage gain. There are 1 circuits on op amps. There are a total of 1 channels available on the op amps. The operating supply voltage of the buffer op amp is rated at 18V. To pack the operational amplifier ics, RAIL is adopted as the packing method.
LM301AN/NOPB Features
8 Pins
supply voltage of 15V
104.08dB voltage gain
LM301AN/NOPB Applications
There are a lot of Texas Instruments LM301AN/NOPB Instrumentational OP Amps applications.
- Ultrasound transducers
- PDA
- Measurements of Wheatstone bridge
- Portable media players
- Signal operation
- Semiconductor detectors
- Weak signal detection
- Tablets
- High input resistance broadband
- Switching amplifier
