LM306P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 440.409842mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Differential |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Max Power Dissipation | 600mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 2.54mm |
| Base Part Number | LM306 |
| Pin Count | 8 |
| Output Type | Push-Pull, TTL |
| Number of Circuits | 1 |
| Nominal Supply Current | 10mA |
| Power Dissipation | 600mW |
| Output Current | 100nA |
| Max Supply Current | 10mA |
| Quiescent Current | 10mA |
| Response Time | 28 ns |
| Voltage - Supply, Single/Dual (±) | ±7.5V~12V |
| Output Current per Channel | 100mA |
| Input Offset Voltage (Vos) | 5mV |
| Neg Supply Voltage-Nom (Vsup) | -12V |
| Voltage Gain | 92.04dB |
| Average Bias Current-Max (IIB) | 25μA |
| Max Input Current | 40μA |
| Dual Supply Voltage | 9V |
| Input Bias Current | 40μA |
| Voltage - Input Offset (Max) | 5mV @ ±12V |
| Current - Input Bias (Max) | 40μA @ ±12V |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM306P Overview
To facilitate transportation, it comes packaged in 8-DIP (0.300, 7.62mm) .Output type Push-Pull, TTL is used for this comparator.The part is shipped by Tube .As you can see, the comparator has8 terminals.The electrical component here belongs to the Comparator family.Electronic comparator is capable of performing numerous tasks when powered by 12V voltage.Speaking of types, this is a typical Differential comparator.Electronic comparator includes 8 pins.Electronic comparator is recommended to mount the device using type Through Hole .Electronic comparator is recommended that you set the operating temperature to 0°C~70°C in order to prevent malfunctions.There are 8 pins on the comparator.If you require more pin-to-pin solutions, search LM306 for more options.In this comparator, the quiescent current is 10mA .This component has a Through Hole mount for mounting to PCBs or other boards.Normal use of the device should require a nominal supply current of 10mA .A current supply greater than 10mA may result in the comparator malfunctioning.The maximal current your can input into the device is 40μA .From the voltage formula, the voltage gain of the part is 92.04dB .
LM306P Features
Push-Pull, TTL output capability
Differential IC
Operates under 0°C~70°C
Quiescent Current: 10mA
Voltage Gain: 92.04dB
LM306P Applications
There are a lot of Texas Instruments LM306P linear comparators applications.
- Zero-Crossing Detectors
- High-Speed Sampling Circuits
- Automotive
- Motor drives
- Consumer Medical Electronics
- Pulse, Squarewave, and Time Delay Generators
- Metering Systems
- Notebooks and PDAs
- Handheld Instruments
- General Purpose Low Voltage Applications
