banner_page

LM311DT

Surface Mount Tape & Reel (TR) 50mA mA 200 ns μs Linear Comparators 106.02dB dB 250nA pA 7.5mA μA 7.5mV mV Surface Mount


  • Manufacturer: STMicroelectronics
  • Nocochips NO: 761-LM311DT
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 109
  • Description: Surface Mount Tape & Reel (TR) 50mA mA 200 ns μs Linear Comparators 106.02dB dB 250nA pA 7.5mA μA 7.5mV mV Surface Mount (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 7 months ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Operating Temperature 0°C~70°C
Packaging Tape & Reel (TR)
JESD-609 Code e4
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type General Purpose
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Comparator
Max Power Dissipation 710mW
Technology BIPOLAR
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 15V
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number LM311
Pin Count 8
Output Type DTL, MOS, Open-Collector, Open-Emitter, RTL, TTL
Operating Supply Voltage 15V
Number of Elements 1
Number of Circuits 1
Nominal Supply Current 7.5mA
Power Dissipation 710mW
Output Current 50mA
Max Supply Current 6mA
Propagation Delay 200 ns
Quiescent Current 7.5mA
Turn On Delay Time 200 ns
Response Time 200 ns
Voltage - Supply, Single/Dual (±) 5V~30V ±2.5V~15V
Output Current per Channel 200pA
Input Offset Voltage (Vos) 7.5mV
Neg Supply Voltage-Nom (Vsup) -15V
Voltage Gain 106.02dB
Average Bias Current-Max (IIB) 0.3μA
Max Input Current 250nA
Input Bias Current 250nA
Voltage - Input Offset (Max) 7.5mV @ ±15V
Current - Input Bias (Max) 0.25μA @ ±15V
Height 1.65mm
Length 5mm
Width 4mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

LM311DT Overview


Electronic comparator is packaged in 8-SOIC (0.154, 3.90mm Width) for convenient transportation.The comparator has a DTL, MOS, Open-Collector, Open-Emitter, RTL, TTL output.The chip is packaged with Tape & Reel (TR) .8 terminals are found on the comparator.The chip belongs to Comparator .A comparator is capable of completing a variety of demanding tasks when supplied with 15V voltage.Speaking of types, this is a typical General Purpose comparator.Electronic comparator consists of 1 elements in total.There are 8 pins on this board.Electronic comparator is recommended that you mount the device using type Surface Mount .The operating temperature should be set to 0°C~70°C to avoid mal-function.Electronic comparator has 8 pins.Try search LM311 to get more pin-to-pin solutions for your special needs.As a result, this comparator displays a quiescent current of 7.5mA .This component has a Surface Mount mount for mounting to PCBs or other boards.Electronic comparator is recommended that the nominal supply current of the device be 7.5mA .If the current supply exceeds 6mA , the comparator could malfunction.Electronic comparator is possible to input a maximum current of 250nA into the device.A voltage gain of 106.02dB can be determined from the voltage formula for the part.The operating supply voltage for normal operation should be 15V .

LM311DT Features


DTL, MOS, Open-Collector, Open-Emitter, RTL, TTL output capability
General Purpose IC
Employing 1 elements
Operates under 0°C~70°C
Quiescent Current: 7.5mA
Voltage Gain: 106.02dB

LM311DT Applications


There are a lot of STMicroelectronics LM311DT linear comparators applications.

  • DC/DC and AC/DC power supplies
  • Lithium ion battery monitoring
  • Alarm and Monitoring Circuits
  • Wearable Devices
  • Point of load regulators
  • Security Detection Systems
  • Window Comparators
  • Wide Range VCO; MOS Clock Timers
  • System control and monitoring
  • Laptop Computers

Write a review

Note: HTML is not translated!
    Bad           Good